Upholstery - Four winns 248 Vista Owner's Manual

N - 1 INTERIOR SEATING
A. Cabin Tables
A cherry dinette is standard on Vista™ models and may
be located in the either the main cabin or in the V-berth
/forward cabin area depending on the model. Table
bases are "flush" mounted for convenience. Table legs
are removable. Rotating the leg while lifting will ease
the removal. See Figure N1. Table leg storage is
provided below the dinette cushions and V-berth cush-
ions on certain models.
248V
288V 298V
328V
Figure N1: Dinette Tables
Vista™ Owner's Manual

UPHOLSTERY

268V
348V
™
The dinette areas on certain Vista™ models can be
converted into sleeping quarters with the use of filler
cushion(s), "short" table leg, and dinette table. See
Figure N2. (Note: The filler cushion(s) are also the
backrest cushion).
Figure N2: Dinette Converts to Berth
To convert the dinette area into a berth follow the steps
below:
1. Remove the dinette table from the "long" table leg.
2. Remove the "long" table leg from its floor mount.
Rotating the leg while lifting will ease the removal.
3. Insert "short" table leg into the floor mount.
4. Place the dinette table onto the "short" leg.
5. Remove the backrest cushions and place them on
the dinette table.
Reverse this procedure to return the berth back into a
dinette.
B. V-berth or Forward Cabin
Four Winns provides cushions for the v-berth/forward
cabin area. These cushions simply drop into place. An
optional inner-spring mattress for the V-berth is avail-
able on certain models. Certain V-berths also come
with a privacy curtain and hanging locker storage. Some
forward cabins may be converted from a dining area to
a berthing space by using a support board and support
rod (as required). See Figure N2.
Section N
Page 1