Cockpit Table; Port Lounge - Four winns 338 Vista Owner's Manual

Figure N16: Under Seat Storage (Stern Seat)
Additionally, an aft fill-in seat cushion is an available
feature. This feature extends the cushion area of the
stern seat for such things as sunbathing, napping or
overnight sleeping. Refer to Figure N17.
Aft Fill-In Seat Cushion
Figure N17: Aft Fill-In Cushion
To install:
1. Insert the fill-in legs (12.5" short legs) into the
floor mounts.
2. Mount the aft cockpit table onto the fill-in legs.
The aft cockpit table provides the support for the
aft cushion.
3. Place the aft fill-in cushion on the cockpit table.
To remove the aft fill-in cushion, simply reverse the
procedure.
C. Port Lounge
A port side lounge provides seating capacity for two
people. It is conveniently built into an integrated
fiberglass base which also contains the refreshment
center. Storage is provided underneath the removable
seat cushion. See Figures N18 and N19.
Upholstery - Section N
Figure N18: Port Lounge
Figure N19: Under Seat Storage - Port Lounge
D. Cockpit Table
An aft cockpit table is standard. An optional wood
cockpit table is available. See Figure N20. Table
bases are "flush" mount ed for convenience and safety.
Figure N20: Cockpit Table -
To set up the cockpit table:
1. Insert the table legs (approximately 26.5" long)
into the floor mounts.
2. Mount the cockpit table onto the table legs.
Wood Table Option Shown
Owner's Manual Page 150