Instructions On Use - Elation DESIGN PROMO 360 User Manual

12. Adjust the desired time by pressing [UP] or [DOWN] button.
13. Press [ENTER] to save the settings for the scene you are editing, the display will change to the next scene
automatically.
14. Repeat step 3-14 to edit and other scenes, you can edit and save a maximum of 48 scenes.
15. Press [MODE/ESC] to exit. The number of steps can be defined under "STEP" and the scenes can be called
up under "RUN"
b) Editing via the external controller
Call up the first scene in your controller now.
1. Select "SC01" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "SC01".
3. Press [ENTER], the display shows "C-01".
4. Select "CNIN" by pressing [UP] or [DOWN] button.
5. Press [ENTER], the display shows "OFF".
6. Press [UP] or [DOWN] button .the display shows "ON".
7. Press [ENTER], the display shows "SC02". You successfully downloaded the first scene.
8. Adjust the Step-time as described above under point 12.
9. Call up the second scene in your controller now.
10. Repeat steps 5-11 until all desired scenes are downloaded.
11. Press [MODE/ESC] to exit. The number of steps can be defined under "STEP" and the scenes can be called up
under "RUN"

INSTRUCTIONS ON USE:

DMX channel´s functions and their values (4 DMX channels):
Channel 1 - PAN movement 8bit :
Channel 2 – Pan fine 16bit
Channel 3 - Speed pan movement:
0-255 PAN max to min speed
Channel 4 - PAN Function :
0-63 Normal
64-127
forwards Pan rotation from
128-191
Backwards Pan rotation
192-235 no function
236-245 Motor reset
246-255 no function
- £ ± £ ³ - XM080-V1.0 NR