Standby Control; Power Button; Network Standby - Samsung UE46D User Manual

Power Control
Auto Power On
PC module power
Max. Power Saving

Standby Control

Power Button

Network Standby

- The displayed image may differ depending on the model.
Off
Off
Off
Power on only
Off
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
Off
•
No Signal
The message will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal is displayed although a source device is connected, check the cable connection.
― If
No Signal Message is set to Off, the
to On.
On
•
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
Power on only: Set the power button to turn on the power.
•
Power on and off: Set the power button to turn on/off the power.
•
Network Standby
This feature keeps the network power on when the product turns off.
Off / On
•
Source is set to PC, DVI, HDMI
No Signal
message does not appear. If this is the case, set
or DisplayPort.
No Signal Message