Samsung QBR Series User Manual
Smart signage
Hide thumbs
Also See for QBR Series:
- User manual (25 pages) ,
- Manual (25 pages) ,
- User manual (114 pages)
Table of Contents
Advertisement
Smart Signage User Manual (By Model)
This manual provides information about your Smart Signage including supported types and product specifications per model.
QBR (QB13R QB13R-T)
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day of this product is under 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are
property of their respective owners.
Advertisement
Table of Contents
Related Manuals for Samsung QBR Series
Summary of Contents for Samsung QBR Series
- Page 1 © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are property of their respective owners.
-
Page 2: Table Of Contents
Table of contents Preparations Using a touchscreen monitor Specifications (Supported model: QB13R-T) Checking the Components General Touchscreen monitor Using the STAND-BAR Preset Timing Modes Read below before using the product Parts Requirements Anti-theft Lock Connecting the touchscreen monitor Appendix Ports Connecting to a PC QB13R Connecting to a laptop or tablet PC... -
Page 3: Checking The Components
Chapter 01 Preparations Checking the Components " Contact the vendor where you purchased the product if any components are missing. Warranty card " The appearance of the components Quick Setup Guide Regulatory guide Power cord may differ from the images shown. (Not available in some locations) "... -
Page 4: Using The Stand-Bar
Using the STAND-BAR Place the product with the face down on top of the protective cloth or cushion. Insert the bar into a slot on the product and then turn to fasten. -
Page 5: Parts
Parts " The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Parts Description Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function. -
Page 6: Anti-Theft Lock
Anti-theft Lock " An anti-theft lock allows you to use the product securely even in public places. " The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. "... -
Page 7: Ports
Ports Port Description AUDIO OUT Outputs sound to an audio device via an audio cable. RS232C IN Connects to MDC using an RS232C adapter. QB13R Connect to a USB memory device. USB ¨(1.0A) " The colour and shape of parts may differ from what is shown. "... -
Page 8: Qb13R-T
QB13R-T Port Description " The colour and shape of parts may differ from what is shown. AUDIO OUT Outputs sound to an audio device via an audio cable. Specifications are subject to change without notice to improve quality. RS232C IN Connects to MDC using an RS232C adapter. -
Page 9: Control Menu
Control menu Items Description Power off the product. " The power button («) is located on the back of the product. • With the control menu screen displayed, briefly press the power button to Power off move the cursor to Power off , and then press and hold the power button to "... -
Page 10: Administrator Menu (Supported Model: Qb13R-T)
Menu To change settings, select a menu item. OSD menu. And go to Device to Control and select Samsung SMART Signage or Auto. • Select Menu from the administrator menu. " If the administrator menu is not displayed, use the remote control to Select the connected input source. -
Page 11: Safety Precautions
Safety Precautions Electricity and Safety " The colour and the appearance may differ depending on the model. Do not put AC/DC adapters together. Do not let water enter the AC/DC adapter device or get the device wet. • An electric shock or fire may result. •... -
Page 12: Before Installing The Product (Installation Guide)
Before Installing the Product (Installation Ventilation Guide) " Contact Samsung Customer Service Centre for further details. Installation on a Perpendicular Wall To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Minimum 50 mm •... -
Page 13: Installing The Wall Mount
We recommend you contact a technician for assistance when installing the wall mount bracket. • Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own. Wall Mount Kit Specifications (VESA) •... -
Page 14: Using A Touchscreen Monitor (Supported Model: Qb13R-T)
Chapter 02 Using a touchscreen monitor (Supported model: QB13R-T) Touchscreen monitor Read below before using the product • Take extra care to ensure an electrical substance does not contact the screen. The screen may not function properly if there is static. Control a PC by tapping the screen instead of using an input device such as a keyboard or •... -
Page 15: Requirements
Requirements Compatible operating systems Single Multi Gestures Plug & Play FW upgrade Remark Professional Win10 32/64bit Home Professional Win8.1 32/64bit Enterprise Professional Win8 32/64bit Enterprise Ultimate Enterprise Windows Professional Win7 32/64bit Home premium Home Basic Starter Vista Home Premium 32/64bit Professional Win XP 32/64bit... - Page 16 Single Multi Gestures Plug & Play FW upgrade Remark Lion 10.7.5 Mountain Lion 10.8.5 Mavericks 10.9.5 Device Driver Mac OSX Yosemite 10.10.5 : UPDD_06_00_426.DMG EL Capitan 10.11.6 Sierra 10.12 High Sierra 10.13 Ubuntu 12.04 and later Linux : Fedora 16 and later Kernel version 3.15 and later Linux OpenSUSE...
-
Page 17: Connecting The Touchscreen Monitor
Connecting the touchscreen monitor Connect the power cable from the product to the power outlet. After the power supply is connected, the product automatically detects and switches to the connected input source. " Connecting parts may differ in different products. "... -
Page 18: Configuring The Touchscreen Monitor Settings
Configuring the touchscreen monitor settings To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product. " First connect the touchscreen monitor before configuring the following settings. " The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings. "... - Page 19 Select the product from Display under Display options. Next, select Calibrate. After calibration is complete, the message Do you want to save the calibration data? appears. Select Yes. Digitizer Calibration Tool Do you want to save the calibration data? The touchscreen monitor has been calibrated successfully. "...
-
Page 20: Controlling The Screen
Controlling the screen Drag Touchscreen gestures Using touchscreen gestures is similar to using a mouse. " The device that receives the touchscreen's gesture inputs can be set in System → Touch Control → Device to Control. Lightly touch and drag in any direction on the screen. Use this gesture to move in a specific direction on a web page, map or photo. -
Page 21: Notes
Flick Notes • To increase the touch input accuracy, enlarge the font or icons. • In touchscreen control mode, use of the remote control when precise clicks or inputs are required is more effective. Flick your finger on the screen as shown in the image. Use this gesture to go to the previous or next picture or web page. -
Page 22: Specifications
Temperature: 0 °C – 40 °C (32 °F – 104 °F) " For detailed device specifications, visit the Samsung Electronics website. * For installing the enclosure, keep the internal Operating temperature at 30 °C or below. -
Page 23: Preset Timing Modes
Preset Timing Modes Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) VESA, 1280 x 1024 63.981 60.020 108.000 The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong VESA, 1280 x 1024 79.976 75.025... -
Page 24: Appendix
YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE. For information on the Open Source Licence Notice, contact the Samsung Customer Centre or send email to oss.request@samsung.com.