Samsung SNOW-1703U User Manual

Samsung SNOW-1703U User Manual

Signage player
Hide thumbs Also See for SNOW-1703U:
Table of Contents


User Manual
IF015H IF020H IF025H
The color and the appearance may differ depending on the product,
and the specifications are subject to change without prior notice to
improve the performance.


Table of Contents

Summary of Contents for Samsung SNOW-1703U

  • Page 1 User Manual SNOW-1703U IF015H IF020H IF025H The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
  • Page 2: Table Of Contents

    Recommended number of devices for connection Reverse Side (IF015H IF020H IF025H) Screen Position for each input voltage Remote Control Format Changing the Input source Remote Control (SNOW-1703U model only) 16 Network Status Source Cable Connection Picture Mode Connection Web Browser...
  • Page 3 Table of contents Approving a connected device from the server 56 Picture Options Connect to Server Setting the current time Color Tone MagicInfo Mode Digital Clean View Server Access HDMI Black Level FTP Mode Film Mode Proxy Server Picture Reset Picture Device Name Picture Mode Contrast / Brightness / Sharpness / Color /...
  • Page 4 Table of contents Support Troubleshooting Guide Network Standby Power Button Software Update Requirements Before Contacting Samsung Eco Solution Customer Service Center Update Now No Signal Power Off Testing the Product Auto Update Auto Power Off Checking the Resolution and Frequency Contact Samsung Check the followings.
  • Page 5: Before Using The Product

    © 2017 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
  • Page 6: Safety Precautions

    The product may become damaged by an electric shock. This symbol alerts you that important literature concerning operation and maintenance has Only use the power cord provided with your product by Samsung. Do not use the power cord been included with this product.
  • Page 7: Installation

    • Children may suffocate. • Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) •...
  • Page 8: Operation

    Be sure to power off the product and disconnect the power cord when water or other • Contact Samsung Customer Service Center for repairs. foreign substances have entered the product. Then contact Samsung Customer Service Center. Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.
  • Page 9: Cleaning

    Do not put the DC power adapter near to any heating apparatus. The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable • Otherwise, a fire may result. batteries for recycling.
  • Page 10: Preparations

    Description HDBT 4, HDBT 3, HDBT 2, View the input HDBT source status of SNOW-1703U. Turn the product on or off. 4 : HDBT 4 / 3 : HDBT 3 / 2 : HDBT 2 / 1 : HDBT 1 HDBT 1 Aim the remote control towards this spot on the LCD Display.
  • Page 11: Reverse Side (Snow-1703U)

    Reverse Side (SNOW-1703U) ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Parts Description Parts Description USB ¨ Connect to a USB memory device. RJ45 Connect to a network using the LAN cable.
  • Page 12: Interface Gender Card (I/G Card)

    Connects to the DATA OUT port on the last cabinet using an OCM cable. DATA OUT (Forward) Connects to the DATA IN port on the first cabinet using an OCM cable. HDBT IN Connects to the HDBT OUT port on SNOW-1703U using an HDBT cable.
  • Page 13: Reverse Side (If015H If020H If025H)

    Reverse Side (IF015H IF020H IF025H) ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Parts Description 100-240V~50/60Hz 4.0A POWER IN DATA IN SERVICE CIRCUIT BREAKER SWITCH DATA OUT POWER OUT POWER IN...
  • Page 14: Remote Control

    ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. ― For Multy S-BOX (SNOW-1703U), the Freeze function is applicable to only a still screen. Power off the product.
  • Page 15 Quickly select frequently used functions. Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Return to the previous menu. Exit the current menu. B: Manually select a connected input source from HDMI C: Manually select a connected input source...
  • Page 16: Remote Control (Snow-1703U Model Only)

    Remote Control (SNOW-1703U model only) • Pin assignment 1 2 3 4 5 5 4 3 2 1 Cable Connection RS232C Cable Interface RS232C (9 pins) 6 7 8 9 9 8 7 6 TxD (No.2), RxD (No.3), GND (No.5) <Male type>...
  • Page 17 LAN Cable • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable • Pin assignment 1 2 3 4 5 6 7 8 -P2- -P1- -P1- -P1- -P2- -P2- Pin No Standard Color Signal Male type ---------- STEREO ---------- PLUG White and orange ---------- (3.5ø) Orange...
  • Page 18 • Connector : RJ45 Cross LAN cable (PC to PC) Direct LAN cable (PC to HUB) RJ45 RJ45 RJ45 MDC Signal Signal ↔ ↔ Signal Signal ↔ ↔ ↔ ↔ ↔ ↔...
  • Page 19: Connection

    Connection • Connection 2 • Connection 1 ― Ensure that you connect the RS232C(IN) adapter to the RS232C IN port on the product. RJ45 HDBT OUT HDBT IN DATA OUT (Forward) DATA IN DATA OUT DATA IN HDBT OUT RS232C IN HDBT IN DATA OUT (Forward) DATA IN...
  • Page 20: Control Codes

    Control Codes Header Command Data length Data 1 Checksum 0xAA 0x11 "Power" Viewing control state (Get control command) Header Command Data length Checksum Header Command Data length Data 1 0xAA Command type 0xAA 0x11 • To control all devices connected by a serial cable simultaneously irrespective of IDs, set Controlling (Set control command) the ID as "0xFE"...
  • Page 21 Power control Input source control • Function • Function A product can be powered on and off using a PC. The input source of a product can be changed using a PC. • Viewing power state (Get Power ON / OFF Status) •...
  • Page 22 Safety Lock • Header Command Data length Ack/Nak r-CMD Val1 Checksum • Function PC can be used to turn the Safety Lock On function on or off on a product. 0xAA 0xFF 0x14 "Input This control is available regardless of whether or not the power is turned on. Source"...
  • Page 23: Connecting And Using Devices

    Chapter 03 Connecting and using devices Before Connecting Connecting to a PC • Do not connect the power cable before connecting all other cables. Pre-connection Checkpoints Ensure you connect a source device first before connecting the power cable. • A PC can be connected to the product in a variety of ways. ―...
  • Page 24: Connection Using An Hdmi-Dvi Cable

    VESA standards. Using a DP cable that is not VESA compliant may cause the product to function improperly. Samsung Electronics shall not be held responsible for any issues from using a cable that is not VESA compliant.
  • Page 25: Connecting To A Video Device

    Connecting to a Video Device Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (up to 1080p) • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •...
  • Page 26: Connecting The Lan Cable

    50 mm or more for cable connection. RJ45 Make sure that the ambient temperature inside the rack mount does not exceed 35°. When installing SNOW-1703U, do not block the air vent on the top to prevent the product from overheating. •...
  • Page 27: Installing The Cabinets

    For more information about how to install the frame kit, refer to the user manual that comes with it. Samsung Electronics shall not be liable for any damage to the product and any injury to the users or others that may be incurred while the users install the product by themselves.
  • Page 28: Precautions When Handling The Cabinets

    [Caution to prevent external shock and dropping of the product] Up to 72 IF015Hs, up to 128 IF020Hs, and up to 200 IF025Hs can be installed per SNOW-1703U. After removing the protective brackets, be careful not You can enjoy image quality of Full HD resolution only when IF015Hs are installed in 3 * 6 layout, to expose the product to external shocks or vibrations.
  • Page 29: Connecting To Cabinets

    Recommended number of devices for connection for each input voltage ― Connect SNOW-1703U to an external device, and then connect it to IF015H, IF020H or IF025H • If using 110 V, you can connect at most 3 IF015H devices, 3 IF020H devices or 4 IF025H devices.
  • Page 30: Changing The Input Source

    Changing the Input source Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source. ―...
  • Page 31: Web Browser

    Web Browser Settings sSOURCE → Source → Web Browser → u → Settings → E sSOURCE → Source → Web Browser → E General Hide Tabs and Toolbar automatically If the browser tabs, menu or toolbar are not used for a while, they will automatically disappear. To make them appear again, move the pointer or focus to the top of the screen.
  • Page 32 Privacy & Security Blocked pages Security Mode Blocked pages Provide warnings about unsafe pages or block access to enhance Web Browser security. Block access to pages that you have listed in Blocked pages. This may slow the Web Browser down. •...
  • Page 33: Refresh Options

    125% 150% 200% 300% Home Page Set the website to display when the web browser is refreshed. • Samsung Display Custom Custom Enter the URL to set as the home page. • Enter URL ― Available only when Home Page...
  • Page 34: Using Led Signage Manager

    ― The installation process for LED Signage Manager may be affected by the graphics card, motherboard, and network environment. ― Make sure that Windows 7 or higher and Microsoft .NET Framework 4.5 are installed on the computer, before installing LED Signage Manager. ― SNOW-1703U does not support the Auto Detect...
  • Page 35: Player Feature

    Chapter 05 Player feature Accessible using the button on the remote control. Player Description Select between internal or external memory. → Player → E Play content, templates and schedules configured on the server. Play a range of content such as channels with schedules assigned, templates or files. •...
  • Page 36: When Content Is Running

    Repeat Set the repeat mode. ► Goes to next file or page. ― SNOW-1703U does not support the sound function. ◄ Goes to previous file or page. E / ∆ / ³ Plays or pauses slide show or video content.
  • Page 37: File Formats Compatible With Player

    File Formats Compatible with Player Template files and LFD(.lfd) files • Supported file systems include FAT32 and NTFS. Restrictions • A file with a vertical and horizontal resolution larger than the maximum resolution cannot • Ensure a distributed folder (content / schedules) exists in Internal Memory memory.
  • Page 38 Contents File Extension Container Video Codec Resolution Frame rate Bit rate (fps) (Mbps) *.avi H.264 BP/MP/HP 4096x2160 4096X2160: 24 *.mkv 3840X2160: 30 *.asf HEVC (H.265 - Main, Main10, Main4:2:2 10) *.wmv Motion JPEG *.mp4 1920x1080 *.mov *.3gp MPEG4 SP/ASP *.vro Window Media Video v9 (VC1) *.mpg MPEG2...
  • Page 39 Video Image • 3D video is not supported. • Compatible image file format : JPEG, PNG, BMP ― 32-bit, 24-bit and 8-bit BMP files are supported. • Content with a resolution larger than the resolution specified in the table above is not supported.
  • Page 40 Power Point WORD • Compatible document file formats • Compatible document file formats • Compatible document file formats – Extension : ppt, pptx – Extension : pdf – Extension : .doc, .docx – Version : Office 97 ~ Office 2007 –...
  • Page 41 Template files • Creation/editing/playback are only available in • Supported in Network Channel Templates. • Compatible document file formats – Extension : .lfd...
  • Page 42: File Formats Compatible With Video Wall

    File Formats Compatible with Video Wall ― Refer to the <MagicInfo Server user's manual> for further details. Video Image • 3D video is not supported. • Compatible image file format : Jpeg, bmp, png • Content with a resolution larger than the resolution specified in the •...
  • Page 43 Restrictions • Only one video (Video) file can be played per client. ― Different content files can be played on the displays of a video wall. Two video (Video) files cannot be played on a single display of a video wall. Available Not available Available...
  • Page 44: Schedule

    Schedule You can check the content’s playback schedule on the server, imported from an external storage, or on a mobile device. Description → Schedule → E Select between server and external memory. Schedule Connected Network View weekly schedule of content playback. Select to view detailed information of each event.
  • Page 45: Clone Product

    Clone Product Export settings on the product to an external storage device. You can also import settings from an external storage device. This option is useful when assigning the same settings to several products. → Clone Product → E When a duplicate file is not found on the external storage device MENU Connect the external storage device, then run the Clone Product...
  • Page 46: Id Settings

    ID Settings Assign an ID to a set. Device ID → ID Settings → E Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224) ― Press u/d to select a number, and press E. ―...
  • Page 47: Video Wall

    Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the →...
  • Page 48: Format

    Format Select how to display images on the videowall display. • Full: Display images in full screen with no margin. • Natural: Display images in the original aspect ratio without enlarging or reducing the size. ― The Format option is only enabled when Video Wall is set to On.
  • Page 49: Network Status

    Network Status Check the current network and Internet connection. → Network Status → E Network Status – The displayed image may differ depending on the model.
  • Page 50: Picture Mode

    – To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness, color, gamma and uniformity, using the color calibration program Advanced Color Management. – To download the Advanced Color Management program, visit
  • Page 51: On/Off Timer

    ― You must set On/Off Timer Clock Set before you can use this feature. On Timer → On/Off Timer → E On Timer so that your product turns on automatically at a time and on a day of your choosing. The product turns on according to the settings of the specified input source.
  • Page 52: Off Timer

    Off Timer Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 Off Timer • Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product.
  • Page 53: Ticker

    Ticker Input text while a video or image is displayed and display the text on the screen. • • Message: Enter a message to display on the screen. → Ticker → E • Time: Set the Start Time End Time to display a Message.
  • Page 54: Url Launcher

    URL Launcher For details on how to use the URL Launcher feature, contact the dealer the product was purchased from. ― To use the URL Launcher feature, set Play via URL Launcher in System. → URL Launcher → E URL Launcher URL Launcher –...
  • Page 55: Url Launcher Settings

    URL Launcher Settings • Install Web App: Enter URL to install the web applocation. • Install from USB Device: Install the web applocation from the USB storage device. • Uninstall: Remove the installed web application. → URL Launcher Settings → E •...
  • Page 56: Approving A Connected Device From The Server

    Approving a connected device from the server ― First configure the server Server Network Settings before device approval. Select Unapproved from the sub-menus. Select the device from the list and click the Approve button. Access the server you have assigned to your device. Enter your ID and password to log in.
  • Page 57: Setting The Current Time

    Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Select the menu to check that the device has been registered. When the device is approved by the server, the schedule registered in the selected group Select Device from the side menu bar.
  • Page 58: Picture

    – To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness, color, gamma and uniformity, using the color calibration program Advanced Color Management. – To download the Advanced Color Management program, visit
  • Page 59: Contrast / Brightness / Sharpness / Color / Tint (G/R)

    Contrast / Brightness / Sharpness / Color / White Balance Tint (G/R) m MENU → Picture → White Balance → E m MENU → Picture → E 2 Point Your product has several options for adjusting picture quality. ― When you make changes to Contrast, Brightness, Sharpness, Adjust the color temperature for a more natural picture.
  • Page 60: Gamma

    ― When HDMI UHD Color is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported by the SNOW-1703U model. When HDMI UHD Color is set to Off, up to 1920 x 1080 @ 60 Hz Black Tone resolution is supported.
  • Page 61: Led Picture Size

    LED Picture Size LED HDR m MENU → Picture → LED Picture Size → E m MENU → Picture → LED HDR → E choose size and aspect ratio picture displayed on screen. Set options to provide an optimal HDR effect. ―...
  • Page 62: Picture Options

    Picture Options HDMI Black Level Selects the black level on the screen to adjust the screen depth. m MENU → Picture → Picture Options → E • Normal Auto ― If ― Available only in Picture Mode is set to Calibration, Picture Options is disabled.
  • Page 63: Onscreen Display

    Chapter 07 OnScreen Display Screen Protection OnScreen Display Screen Protection m MENU → OnScreen Display → Screen Protection → E Message Display Auto Protection Time English Language If the screen displays a still image for a certain period of time you define, the product activates the screen saver to Original Menu Size prevent the formation of burnt in ghost images on the screen.
  • Page 64: Message Display

    Message Display Language m MENU → OnScreen Display → Message Display → E m MENU → OnScreen Display → Language → E Set the menu language. Source Info ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC.
  • Page 65: Network

    → E You can check the current network and Internet status. Open Network Settings Server Network Settings Open Network Settings Device Name [LED S/Box] Samsung LUH Series m MENU → Network → Open Network Settings → E Configure network settings to use various smart hub features such as Internet search, content sharing through a –...
  • Page 66: Network Settings

    Network Settings • Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. Connecting to a Wired Network See the diagram below.
  • Page 67 Set the network connection to use Internet services such as perform software upgrades. How to set up manually Select Open Network Settings. The Open Network Settings session starts. Automatic Open Network Settings Connect to the network using a LAN cable. The network test screen appears and the verification process starts.
  • Page 68: Server Network Settings

    Select or enter a device name. • Lite Premium This name can be shown on network remote controls over the network. • [LED S/Box] Samsung LUH Series1 User Input Server Access Select a method to connect the server network. • Allow...
  • Page 69: System

    Chapter 09 System Accessibility System Accessibility m MENU → System → Accessibility → E Start Setup Menu Transparency Time Adjust transparency of menu box. Auto Source Switching • High Power Control High Contrast Eco Solution Set the background and font to high-contrast colors in Menu. Menu transparencies become opaque when the option is selected.
  • Page 70: Start Setup

    Start Setup Switches the DST (Daylight Saving Time) function on or off. m MENU → System → Start Setup → E Go through the initial setup steps like you did the first time you used this product. • Start Date: Set the start date of Daylight Saving Time. ―...
  • Page 71: Auto Source Switching

    Auto Source Switching Primary Source Recovery Select whether to restore the selected primary input source when a primary input source is connected. m MENU → System → Auto Source Switching → E ― The Primary Source Recovery function is disabled if Primary Source is set to All.
  • Page 72: Power Control

    Power Control Network Standby This feature keeps the network power on when the product turns off. m MENU → System → Power Control → E • Auto Power On Power Button This feature automatically turns on the product as soon as it is plugged in. Pressing the power The power button can be set to either turn on the power or turn on/off the power.
  • Page 73: Temperature Control

    Temperature Control Play via m MENU → System → Temperature Control → E m MENU → System → Play via → E This function detects the internal temperature of the product. You can specify the temperature Select the appropriate Play via mode depending on the environment where you are using the range that is acceptable.
  • Page 74: Security

    Security USB Auto Play Lock Select whether to automatically play MagicInfo content saved on a connected USB device. m MENU → System → Security → E • ― Enter your 4 digit PIN number. The default PIN number is “0-0-0-0". Play MagicInfo content saved on the USB device automatically.
  • Page 75: General

    → General → E Anynet+ is a function that enables you to control all connected Samsung devices that support Smart Security Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
  • Page 76 Problem Possible Solution Troubleshooting for Anynet+ The connected device • Check whether or not the device supports Anynet+ functions. Problem Possible Solution is not displayed. • Check whether or not the HDMI cable is properly connected. Anynet+ does not work. •...
  • Page 77: Custom Logo

    Reset System ― You can download a custom logo into the product from an external USB device. ― The file name of the custom logo you want to download must be saved as “samsung” in all small letters. m MENU →...
  • Page 78: Support

    Chapter 10 Support Software Update Contact Samsung m MENU → Support → Software Update → E m MENU → Support → Contact Samsung → E Software Update menu lets you upgrade your product software to the latest version. View this information when your product does not work properly or when you want to upgrade the software.
  • Page 79: Playing Photos And Videos (Media Play)

    • Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost. Samsung Electronics is not liable for any damage or loss of data. • Do not remove a USB device while it is loading.
  • Page 80 Compatible devices with media play • Some USB digital cameras and smartphones may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs.
  • Page 81: Using A Usb Device

    Using a USB device Connecting a USB device Turn on your product. Connect a USB device containing photo and/or movie files to the USB port on the back or side panel of the product. Player page automatically appears as soon as a USB device connects to the product. ―...
  • Page 82: Features Provided In The Media Content List Page

    Features provided in the media content list page → Player → Storage device → The media content list page on a storage device provides the following features. • Storage device Internal Memory • Filter By Among Video, Image, PDF, Office My Templates content saved on a storage device, view content files under a desired file format only.
  • Page 83: Menu Items In The Media Content List Page

    Option Name Operations Menu items in the media content list page Play Selected Select the content you want to play, then select the play button at the top of the screen. Play Selected Send Select the content you want to send to the other device, then select the Send Send button at the top of the screen.
  • Page 84: Available Buttons And Features During Photo Playback

    Available buttons and features during photo playback Pressing the E button or π, ∂, ∑, µ button displays the following buttons. The RETURN button makes the buttons disappear. • Pause / Play Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder. •...
  • Page 85: Troubleshooting Guide

    Chapter 12 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product Testing the Product as follows. If the problem persists, contact Samsung Customer Service Check if your product is operating normally by using the product test function.
  • Page 86: Check The Followings

    Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product.
  • Page 87 Screen issue The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table.
  • Page 88 Lines (red, green or blue) are displayed on the screen. These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a Samsung Service Center to resolve the issue. The display looks unstable and then freezes.
  • Page 89 Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting.
  • Page 90 Other issue The IR sensor is not functioning. Make sure the sensor light turns on when a button is pressed on the remote control. • If the light does not turn on, turn the power switch off and then on again. If the sensor light still does not turn on after the power switch is turned off and then on again, an internal jack may be disconnected.
  • Page 91: Q & A

    Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. •...
  • Page 92 Question Answer How do I set powersaving mode? • Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver Settings or BIOS SETUP on the PC.
  • Page 93: Specifications

    Specifications General Model Name SNOW-1703U Power Supply AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries.
  • Page 94 ― This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. ― For detailed device specifications, visit the Samsung Electronics website. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: or call, (877) 278 - 0799...
  • Page 95: Preset Timing Modes

    ― When HDMI UHD Color is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported by the SNOW-1703U model. When HDMI UHD Color is set to Off, up to 1920 x 1080 @ 60 Hz resolution is supported.
  • Page 96 Resolution Horizontal Vertical Pixel Clock Sync Polarity S-Box Grouping Frequency Frequency Supported (MHz) (H/V) (kHz) (Hz) VESA, 640 x 480 37.861 72.809 31.500 VESA, 640 x 480 37.500 75.000 31.500 VESA, 800 x 600 35.156 56.250 36.000 VESA, 800 x 600 37.879 60.317 40.000...
  • Page 97: Appendix

    External impact or drop. ― When the service is requested, in spite of in warranty, we may charge you for a visit from a • Use of supplies or separatly sold product unspecified by Samsung. service technician in the following cases. •...
  • Page 98: License

    If you want to obtain the complete Corresponding Source code in the physical medium such For information on the Open Source Licence Notice, contact the Samsung Customer Center as CD-ROM, the cost of physically performing source distribution may be charged.

This manual is also suitable for:


Table of Contents