Table of Contents
Advertisement
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Remote Configuration
Power Button
Power on only
" The displayed image may differ depending on the model.
Standby Control
When no signal is detected, it determines whether or not to enter sleep mode.
Off
" This function may not be supported depending on the model.
•
Auto
The display stays off to save energy until working signals are detected even if there is an external device
connected.
On
The message
On
" For the
•
Off
Off
The message
" If the message,
" If
•
On
The display turns off to save energy if no input signals are detected.
Remote Configuration
This feature keeps the network power on when the product turns off.
•
Off
Power Button
The power button on the remote control
•
Power on
•
Power on and
No Cable Connected
will appear if no source device is connected.
HDMI
input source, it works as On.
No Signal
will appear if no input signals are detected.
"No
Signal" appears even though a source device is connected, check the cable connections
and the settings of your source device.
No Signal Message
is set to Off, the
No Signal
In this case, set
No Signal Message
to On.
/
On
can be set to turn on the power or turn on or off the power.
only: Set the power button on the remote control
off: Set the power button on the remote control
message does not appear.
only to turn on the power.
to turn on or off the power.
89
Advertisement
Table of Contents
