Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source
device is connected to the display.
The message
No Signal
will appear if no source device is connected.
•
Off
The message
No Signal
will appear if no input signals are detected.
― If
No Signal
is displayed although a source device is connected, check the cable
connection.
― If
No Signal Message
is set to Off, the
If this is the case, set
No Signal Message
•
On
Power-saving mode will activate if no input signals are detected.
Remote Configuration
This feature keeps the network power on when the product turns off.
•
Off
/
On
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•
Power On
Only: Set the power button to turn on the power.
•
Power
On/Off: Set the power button to turn on/off the power.
No Signal
message does not appear.
to On.
Eco Solution
MENU m →
System
→
Eco Solution
→ ENTER E
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
•
Off
/
Low
/
Medium
/
High
Screen Lamp Schedule
Screen Lamp Schedule
Enable or disable the lamp schedule.
•
Off
/
On
Schedule1, Schedule2
Time
The panel brightness will change to the brightness set in
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•
0
~
100
Lamp
at a specified time.
57