Power Control
m MENU →
System
→
Power Control
→ E
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power
button is not needed.
•
Off
/
On
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a
specified period of time.
•
Off
/
On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source
device is connected to the display.
The message
No Signal
will appear if no source device is connected.
•
Off
The message
No Signal
will appear if no input signals are detected.
― If
No Signal
is displayed although a source device is connected, check the cable
connection.
― If
No Signal Message
is set to Off, the
If this is the case, set
No Signal Message
•
On
Power-saving mode will activate if no input signals are detected.
No Signal
message does not appear.
to On.
Network Standby
This feature keeps the network power on when the product turns off.
•
Off
/
On
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•
Power On
Only: Set the power button to turn on the power.
•
Power
On/Off: Set the power button to turn on/off the power.
Eco Solution
m MENU →
System
→
Eco Solution
→ E
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•
Off
/
15 min.
/
30 min.
/
60 min.
― Disabled when an attached PC is in power saving mode.
― The product will automatically power off at a specified time. The time can be changed as
required.
Auto Power Off
The product will automatically turn off if you don't press a button on the remote or touch a
button on product front panel within select hours to prevent overheating.
•
Off
/
4 hours
/
6 hours
/
8 hours
72