Power Control
MENU m →
System
→
Power Control
→ ENTER E
Power Control
Brightness Limit
Auto Power On
Max. Power Saving
Standby Control
Remote Configuration
Power Button
Power on only
― The displayed image may differ depending on the model.
Brightness Limit
Turn the
•
Off
― This function may not be supported depending on the model or geographical area.
Auto Power On
Off
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Off
•
Off
On
Max. Power Saving
On
Off
Conserve power by turning off PC monitor when PC is not used for certain time.
•
Off
Standby Control
When no signal is detected, it determines whether or not to enter sleep mode.
•
Auto
The display stays off to save energy until working signals are detected even if there is an external device connected.
The message
•
Off
The message
― If the message,
your source device.
― If
No Signal Message
In this case, set
•
On
The display turns off to save energy if no input signals are detected.
Brightness Limit
on or off. If you select On, the display won't have the maximum brightness, but you will save energy.
/
On
/
On
/
On
No Cable Connected
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
"No
Signal" appears even though a source device is connected, check the cable connections and the settings of
is set to Off, the
No Signal
message does not appear.
No Signal Message
to On.
83