Power Control
MENU m →
System
→
Power Control
→ ENTER E
Power Control
Auto Power On
Max. Power Saving
Standby Control
Remote Configuration
Power Button
Power on only
― The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
•
Off
Max. Power Saving
Off
Conserve power by turning off PC monitor when PC is not used for certain time.
On
•
Off
On
Standby Control
Off
When no signal is detected, it determines whether or not to enter sleep mode.
•
Auto
The display stays off to save energy until working signals are detected even if there is an external device connected.
The message
•
Off
The message
― If the message,
your source device.
― If
No Signal Message
In this case, set
•
On
The display turns off to save energy if no input signals are detected.
/
On
/
On
No Cable Connected
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
"No
Signal" appears even though a source device is connected, check the cable connections and the settings of
is set to Off, the
No Signal
message does not appear.
No Signal Message
to On.
81