Installing The Connecting Arm And Relay Arm - Yamaha MT-01 T 2005 Service Manual

• Oil seals
Damage/pitting → Replace.
3. Check:
• Collars
• Spacers
Damage/scratches → Replace.
EAS23270
INSTALLING THE CONNECTING ARM AND
RELAY ARM
1. Lubricate:
• Spacers
• Bearings
Recommended lubricant
Lithium-soap-based grease
2. Install:
• Bearing "1"
(to the relay arm)
• Bearings "2"
(to the connecting arm)
• Oil seals "3"
(to the relay arm)
• Oil seals "4"
(to the connecting arm)
Installed depth "a"
8.0 mm (0.31 in)
Installed depth "b"
4.0 mm (0.16 in)
Installed depth "c"
7.0 mm (0.28 in)
Installed depth "d"
0.5–1.0 mm (0.02–0.04 in)
REAR SHOCK ABSORBER ASSEMBLY
A
5. Relay arm
6. Connecting arm
7. Rear shock absorber
A. Left side
B. Right side
3. Install:
• Relay arm "1"
(to the connecting arm)
NOTE:
Install the relay arm with its "R" mark "a" facing
to the right and its arrow mark "b" facing upward.
4. Tighten:
• Rear shock absorber assembly nut (rear
side)
• Relay arm nut (relay arm and connecting
arm)
4-63
2 4 2
4 4
d
b
b
d
a
4 6 2 4 3 1
1
a
b
R
Rear shock absorber assembly
nut (rear side)
40 Nm (4.0 m·kg, 29 ft·lb)
6
4
d
c
B
7
b
5
d
3 4 2 4