Yamaha MT-01 T 2005 Service Manual page 139

• Collar (brake disc side) "2"
NOTE:
The collar (brake disc side) has marks "a" to dis-
tinguish it from the collar (wheel sprocket side).
5. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" on page 3-24.
Drive chain slack
40.0–50.0 mm (1.57–1.97 in)
6. Install:
• Rear brake caliper
Rear brake caliper bolt (M12)
27 Nm (2.7 m·kg, 19 ft·lb)
Rear brake caliper bolt (M8)
22 Nm (2.2 m·kg, 16 ft·lb)
LOCTITE
EWA13500
WARNING
Make sure the brake hose is routed properly.
a
1
®
2
4-17
REAR WHEEL