Yamaha MT-01 T 2005 Service Manual page 175

• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
4
3
2
1
5. Install:
• Outer tube
(to the inner tube)
6. Install:
• Washer
• Oil seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–46
mm)
YM-01442
2
7. Install:
• Oil seal clip "1"
1
4-53
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube's groove.
8. Install:
• Dust seal "1"
(with the fork seal driver weight "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–46
mm)
YM-01442
9. Install:
• Rod puller "1"
• Rod puller attachment "2"
(onto the damper rod "3")
Rod puller
90890-01437
Universal damping rod bleeding
tool set
YM-A8703
Rod puller attachment (M10)
90890-01436
Universal damping rod bleeding
tool set
YM-A8703
FRONT FORK