Replacing The Camera; Procedure; Post-Requisites - Dell Inspiron 23 Owner's Manual

Replacing the Camera

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Connect the camera cable to the camera module.
2 Align the screw hole on the ground cable and the camera module with
the screw hole on the display bezel.
3 Replace the screw that secures the ground cable and the camera module
to the display bezel.

Post-requisites

1 Follow the procedure from step 11 to step 17 in "Replacing the
Panel".
2 Replace the system
3 Replace the coin-cell
4 Replace the wireless
5 Replace the processor.
6 Replace the processor
7 Replace the processor
8 Replace the power-supply
9 Replace the power-supply
10 Replace the optical
11 Replace the I/O
12 Replace the power-supply diagnostic
13 Replace the converter
14 Replace the control buttons
15 Replace the VESA-mount
16 Replace the hard
17 Replace the system-board
Computer. After working inside your
board.
battery.
card.
fan.
heat-sink.
unit.
fan.
drive.
bracket.
board.
board.
bracket.
drive.
shield.
After Working Inside Your
board.
Display
95