Replacing the System-Board
Shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align and place the system-board shield on the display-panel base.
2
Slide the tabs on the system-board shield into the slots on the display-
panel base until it snaps into place.
Post-requisites
1
Replace the
back
2
Replace the
stand
36
Computer. After working inside your
cover.
assembly.
After Working Inside Your