Replacing The Power-Supply Diagnostic Board; Procedure; Post-Requisites - Dell Inspiron 23 Owner's Manual
Dell inspiron 23 all-in-one touch screen desktop
Hide thumbs
Also See for Inspiron 23:
- Service manual (106 pages) ,
- Manual (21 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Replacing the Power-Supply
Diagnostic Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Connect the power-supply diagnostic board cable to the connector on
the power-supply diagnostic board.
2
Align the screw hole on the power-supply diagnostic board with the
screw hole on the I/O bracket.
3
Replace the screw that secures the power-supply diagnostic board to the
I/O bracket.
Post-requisites
1
Replace the
VESA-mount
2
Replace the
system-board
3
Replace the
back
4
Replace the
stand
Computer. After working inside your
bracket.
shield.
cover.
assembly.
After Working Inside Your
51
Hide quick links:
Advertisement
Table of Contents
