Replacing The System Board; Procedure; Post-Requisites - Dell Inspiron 23 Owner's Manual

Replacing the System Board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the system setup after you replace the
system board.

Procedure

1 Replace the side I/O bracket on the system board.
2 Align the screw holes on the system board with the screw holes on the
display-panel base.
3 Replace the screws that secure the system board to the chassis.
4 Route and connect all the cables to the connectors on the system board.

Post-requisites

1 Replace the coin-cell
2 Replace the wireless
3 Replace the hard
4 Replace the processor.
5 Replace the processor
6 Replace the processor
7 Replace the I/O
8 Replace the power-supply diagnostic
9 Replace the VESA-mount
10 Replace the system-board
11 Replace the memory
12 Replace the back
13 Replace the stand
Computer. After working inside your
battery.
card.
drive.
fan.
heat-sink.
bracket.
bracket.
shield.
module(s).
cover.
assembly.
After Working Inside Your
board.
91