Replacing The Antenna; Procedure; Post-Requisites - Dell Inspiron 23 Owner's Manual

Replacing the Antenna

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the antenna modules with the screw holes on
the display bezel.
2 Replace the screws that secure the antenna modules to the display bezel.
3 Route the antenna cables through the routing guides on the display-
panel base.
4 Adhere the tape to secure the antenna modules to the display bezel.

Post-requisites

1 Replace the system
2 Replace the coin-cell
3 Replace the wireless
4 Replace the processor.
5 Replace the processor
6 Replace the processor
7 Replace the power-supply
8 Replace the power-supply
9 Replace the optical
10 Replace the I/O
11 Replace the power-supply diagnostic
12 Replace the converter
13 Replace the control buttons
14 Replace the VESA-mount
15 Replace the hard
16 Replace the system-board
17 Replace the memory
Computer. After working inside your
board.
battery.
card.
fan.
heat-sink.
unit.
fan.
drive.
bracket.
board.
board.
bracket.
drive.
shield.
module(s).
After Working Inside Your
board.
99