Replacing the I/O Bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the power port through the I/O bracket.
2
Align the screw holes on the I/O bracket with the screw holes on the
display-panel base.
3
Replace the screws that secure the I/O bracket to the display-panel base.
4
Align the screw holes on the power port with the screw holes on the I/O
bracket.
5
Replace the screws that secure the power port to the I/O bracket.
Post-requisites
1
Replace the
power-supply diagnostic
2
Replace the
VESA-mount
3
Replace the
system-board
4
Replace the
back
5
Replace the
stand
Computer. After working inside your
bracket.
shield.
cover.
assembly.
After Working Inside Your
board.
63