Unpacking; Introduction - Superior BRT4036TMN Installation And Operation Instructions Manual

Custom series decorative b-vent fireplace millivolt system
Table of Contents

Advertisement

clear of combustible materials, gasoline
and other flammable vapor and liquids.
Do not run fireplace where these are
used or stored. Do not place items such
as clothing or decorations on or around
fireplace.
12. Do not use this fireplace to cook food or
burn paper or other objects.
13. Do not use any solid fuels (wood, coal,
paper, cardboard, etc.) in this fireplace.
Use only the gas type indicated on fire-
place nameplate.
14. This appliance, when installed, must be
electrically grounded in accordance with
local codes or, in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70 or the Canadian Electrical
Code, CSA C22.1.
15. Do not obstruct the flow of combustion
and ventilation air in any way. Provide
The following items are packed inside the
firebox. Remove before positioning firebox
into framing.
• Transition Collar - For vent connection
• Ceramic Log Pack - Shrink-wrapped on
cardboard
• Three (3) plastic bags containing lava rock,
pan and ember materials
Models BRT4036TMN, 4336TMN, 4536TMN,
4042TMN, 4342TMN, 4542TMN, 4036TMP,
4336TMP, 4536TMP, 4042TMP, 4342TMP,
4542TMP are vented gas fireplaces that use
a millivolt gas control valve with a millivolt
ignition system. A 6" B-Type venting system
and a listed type vent cap are not supplied but
are required for proper operation. See venting
instructions on pages 10 and 11.
WARNING: This gas appli-
ance must not be connected to
a chimney flue servicing a solid
fuel burning appliance.
BEFORE YOU BEGIN
Before beginning the installation of your
appliance, read these instructions through
4
SAFETY
Continued

UNPACKING

INTRODUCTION

www.SuperiorFireplaces.US.com
adequate clearances around air open-
ings into the combustion chamber along
with adequate accessibility clearance for
servicing and proper operation.
16. Do not install fireplace directly on carpet-
ing, vinyl tile or any combustible material
other than wood. The fireplace must set
on a metal or wood panel extending the
full width and depth of the fireplace.
17. Do not use fireplace if any part has been
exposed to or under water. Immediately
call a qualified service person to arrange
for replacement of the unit.
18. Do not operate fireplace if any log is
broken.
19. Do not use a blower insert, heat exchang-
er insert or other accessory not approved
for use with this fireplace.
20. Provide adequate clearances around air
openings.
• Rear Log - Remove the two plastic quick
ties from around the burner and grate
• Grate Stand - Lift off of burner pan
Check all items for any shipping damage. If
damaged, promptly inform dealer or distributor
where you bought the product.
Safely retain these items for later installation.
completely.
This INNOVATIVE HEARTH PRODUCTS ap-
pliance and its approved components are safe
when installed according to this installation
manual and are operated as recommended by
INNOVATIVE HEARTH PRODUCTS. Unless
you use INNOVATIVE HEARTH PRODUCTS
approved components tested for this appli-
ance, YOU MAY CAUSE A FIRE HAZARD!
The INNOVATIVE HEARTH PRODUCTS
warranty will be voided by and INNOVATIVE
HEARTH PRODUCTS disclaims any respon-
sibility for the following actions :
A) Modification of the appliance or any of the
components.
B) Use of any component part not approved
by INNOVATIVE HEARTH PRODUCTS
in combination with this appliance.
C) Installation and/or operation in a manner
126736-01B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents