Superior BRT4036TMN Installation And Operation Instructions Manual page 16

LOG PLACEMENT FOR BRT4042,
BRT4342 AND BRT4542 MODELS
1. Place large back log (log 1) onto grate
making sure notches rest over grate (see
Figure 26).
2. Insert lower end of log 2A between first
two grate fingers and position upper end
into notch on front of log 1. See Figure 26.
Place log 2B on front right side of grate as
shown in Figure 26.
3. Place log 3 into notch on top left of log 1,
resting lower end on left two grate fingers
(see Figure 27).
4. Place upper end of log 4 into notch on log
1 as shown in Figure 27. Rest lower end
of log 4 on middle grate finger as shown
in Figure 28.
Notch
Log 2A
Figure 26 - Installing Logs 1, 2A and 2B
Log 3
Notches
Figure 27 - Installing Logs 3 and 4
16
INSTALLATION
Continued
Log 1
Log 2B
Log 4
Log 1
www.SuperiorFireplaces.US.com
5. Place upper end of log 5 into notch on top
inner right of log 1 (see Figure 28). Rest
lower end of log 5 on middle grate finger
as shown in Figure 29.
6. Place log 6 into notch on top right of log
1 (see Figure 28). Rest lower end of log
6 on top of log 2B (see Figure 29).
As an option to enhance the look of the hearth,
you may place the lava rock provided around
front and sides of burner pan.
NOTICE: Do not put lava rock
inside the burner pan or around
the air mixer fitting. Placing lava
rock inside the burner pan or
blocking the openings of the pro-
pane/LP air-mixer could cause
performance problems.
Log 5
Figure 28 - Installing Logs 5 and 6
Figure 29 - Logs Installed for M42, M42P,
VM42 and VM42P Models
Log 6
Log 1
Notch
Log 2B
126736-01B