Changing The Water Hardness Monitor; Changing Pre-Set Cup Sizes; 1-And 2-Cup Buttons; Special Cup Button - Jura Capresso 65349R3 Operating Instructions Manual

Fully automatic coffee & espresso center with clearyl water care system
Table of Contents

Advertisement

The Z5 will give you the following options:
Level
Not Active*
Not Active
I
1. extremely soft water
I
2. soft water
I I
3. medium water
I I I
4. hard water
I I I I
5. very hard water
I I I I I
6. extremely hard water
*Not Active: You can only use this setting for distilled water.
Level 5 and Level 6: If your tab water is very hard and falls into
these two categories, decalcifying will be frequent. In this case
bottled water is recommended.
Please note: If your water has a high calcium content (level 5 or 6)
and you use the Clearyl Filter Cartridge we recommend to decalcify
the Z5 once or twice a year (chapter 26.1).
24a. CHANGING THE WATER HARDNESS MONITOR
COFFEE READY
• Push the Rotary Dial until you hear a beep.
FILTER
• Turn the Rotary Dial until the display shows
HARDNESS 10º DH
• Push the Rotary Dial to enter the program.
• Turn the Rotary Dial until desired hardness level is displayed.
Display
Equivalent
German
American
Display
Degree
Grains
1-4
1-5
5-9
6-11
10-14
13-18
15-19
19-24
20-24
25-30
25 +
32 +
• Push the Rotary Dial to confirm the setting.
• Turn the Rotary Dial until the display shows EXIT.
Indicator Strip
• Push the Rotary Dial.
number of
COFFEE READY
"reddish" fields
The Z5 will automatically remind you when it is time to decalcify
(chapter 29).
None
1 to 2

25. CHANGING PRE-SET CUP SIZES

2 to 3
Each beverage button has been set to certain values (pre-sets).
3 to 4
See chapter 5. You can change all pre-set values and enter ones.
4 to 5
All 5

25.1 1-AND 2-CUP BUTTONS; SPECIAL CUP BUTTON

This procedure is the same for all five coffee buttons (Fig. 3).
COFFEE READY
EXAMPLE: Changing the 1-cup Coffee Button. (Fig.3).
• Place a cup underneath the coffee spouts.
• Push and hold the 1-cup Coffee Button until the display
shows
ENOUGH? PRESS
• When the coffee volume in your cup is at the new desired
level, push the 1-cup Coffee Button again. The display shows
CONFIRMED 
COFFEE READY
From now on, this will be the amount of coffee the Z5 will produce
when you push this button.
Please note: the 1-cup and 2-cup buttons are independent of
each other. This means if you pre-set the 1-cup coffee button to
4 oz. the 2-cup button does not automatically produce 8 oz. You
can pre-set the 2-cup button completely independent.
Please note: when changing the volume for the special cup
button, place a cup under the auto cappuccino system.
22.
BUTTON.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Impressa z5

Table of Contents