Related Manuals for Jura Capresso 65349R3
Summary of Contents for Jura Capresso 65349R3
- Page 1 Impressa Z5 Fully Automatic Coffee & Espresso Center with Clearyl Water Care System Operating Instructions and Warranty Customer Service 1-800-220-5701...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids. -
Page 3: Jura-Capresso / Address Information
Notice: Your Impressa Z5 has a 3-prong grounded plug. To reduce the risk of electrical shock this plug will fit in an outlet only one way. If the plug does not fit in the outlet contact a qualified electrician. DO NOT modify the plug in any way. CAUTION This appliance is for household use only. -
Page 4: Illustrations
Fig. 1 a. Measuring scoop b. Cleaning tablets c. Water hardness indicator strip d. Clearyl Water cartridge* (unpacked) Cover lid (spring loaded) Bean container safety lid (Fig. 4) Bean container Operating panel (Fig. 3) Dual coffee spout (adjustable height) Hot water spout Cup illumination (behind coffee spouts) Used coffee container Removable tray... - Page 5 On/Off C O F F E E R E A D Y Milk Cappuccino Special Latte Coffee Water Lid for Grind ground selector coffee Bean container safety lid Fig. 4 Rotary Dial Rinse 1-Cup 2-Cup 1-Cup 2-Cup Espresso Coffee Fig. 3 Dual Fixed Spouts Venting tip...
-
Page 6: Cappuccino And Latte
Fig. 5c Fig. 5d Fig. 6a Milk & Froth (Cappuccino) Milk only (Latte) Steam only (Rinsing) Milk Coffee Nozzle Nozzle Fig. 5e Fig. 5f Fig. 3 Fig. 7 Fig. 8 Elbow hose fits inside straight hose Fig. 6 Fig. 9 Fig. - Page 7 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15...
-
Page 8: Table Of Contents
Chapter Important Safeguards...2 Jura-Capresso / Address Information ...3 Illustrations...4–7 Product Warranty Registration ...10 Operating Instructions / Customer Service...10 WELCOME TO THE IMPRESSA Z5 ...10 a. "Crema Coffee" and Pressure Brewing...10 b. Different Coffee Drinks ...11 c. Coffee Facts ...11 Please Don't / Please Do ...11 Factory Settings ...12 PREPARING MACHINE FOR THE FIRST TIME...12 a. - Page 9 Chapter Water Hardness Monitor ...21 a. Changing the Water Hardness Monitor...22 Changing Pre-Set Cup Sizes...22 25.1 1- and 2-Cup Buttons: Special Cup Button ...22 25.2 Cappuccino Button...23 25.3 Milk Button...23 25.4 Hot Water Button...23 Programming / Maintenance...23 26.1 Maintenance Programs...24 26.2 Temperature ...25 26.3 Coffee Strengths / Aroma...25 26.4 Cappuccino Programming...25...
-
Page 10: Product Warranty Registration
1. PRODUCT WARRANTY REGISTRATION Please read the enclosed product registration form now. Fill it out and mail or fax it to us within two weeks after purchasing your machine or register online through our website: www.capresso.com. Important: This registration is part of your warranty (chapter 35). 2. -
Page 11: Different Coffee Drinks
and brewing under high pressure is the ideal extracting process for maximum flavor and aroma. Your Jura-Capresso automatic coffee center will always produce espresso and coffee with a thick, foamy layer called "crema." The crema traps the fine aro- matics and the light gaseous flavors that register on the palate. The high pressure and the short brewing time prevent the extraction of bitter oils and release less caffeine than any other brewing method. -
Page 12: Factory Settings
• Never repair or open the machine yourself. All repairs should be performed only by an authorized service center. PLEASE, DO... • Fill water tank with fresh, cold water only. • Remove any foreign particles (small stones) from coffee beans. •... -
Page 13: Turning The Machine On
beans (all coating and flavors contain sugar or sugar substances). Such coating can damage the burrs. Using such beans voids the warranty. Have your coffee store grind the sugar coated beans and use as described in the ground coffee funnel (chapter 20). Please note: If you like flavored coffees we recommend to add flavors to your coffee after brewing. -
Page 14: Adjusting The Grinder
Z5 enough time to completely charge its internal back-up battery. When fully charged, the internal battery will back up the clock for up to eight weeks. 7. ADJUSTING THE GRINDER You can adjust the grinder to the roast of your coffee. We recommend the following: Light roast: use a finer adjustment. -
Page 15: Overriding Strength And Cup Size During Brewing
is no need to pull out the drawer unless you see the message EMPTY GROUNDS (chapter 27.4). Please note: You can always stop the brewing process by pressing the Rotary Dial or any of the eight beverage buttons. This will not affect the pre-set values. 11. -
Page 16: Cappuccino And Latte
Please note: There is a gap between the Coffee Nozzle and the fixed coffee spout. (Fig. 5e) This is necessary to assure proper coffee flow. Please note: The Milk Nozzle should always be tightly connected to the Dial Component (Fig. 5e) and the venting tip needs to be clean and inserted to assure proper frothing action (Fig. -
Page 17: Hot Milk And Hot Chocolate
Please note: Cold milk will stay fresh up to 8 hours in the thermal milk container. Do not leave the milk sitting outside the refrigerator over night. Please note: If there is not enough milk in the milk container, the frother nozzle will dispense steam only. -
Page 18: Cappuccino Cleaning Cycle
Please note: When you are finished using the cappuccino feature for the day please proceed as follows: a. Remove the Thermal Milk container and place in the refrigerator. b. Remove the flexible hose on both ends and clean with hot water. c. -
Page 19: Using Pre-Ground Coffee
20. USING PRE-GROUND COFFEE You can also use pre-ground coffee, bypassing the grinder. This comes in handy if someone requests decaf coffee or a decaf cappuccino. You can also use the pre-ground funnel for ground flavored coffee. Please note: Never fill the funnel with instant coffee. Do not fill the funnel with more than two scoops. -
Page 20: Clearyl Water Filter Cartridge
23. CLEARYL WATER FILTER CARTRIDGE The machine comes with one Clearyl Water Filter Cartridge. The Clearyl cartridge • Reduces the water hardness up to 75%. • Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum. •... -
Page 21: Replacing The Clearyl Cartridge
immerse it at least to a third of its length into a cup with cold water. Store the cup in the refrigerator. This way the filter does not dry out. When you use your machine again, install the filter. Use the hot water cycle and let approx. 16 oz. of water run through the system. -
Page 22: Changing The Water Hardness Monitor
The Z5 will give you the following options: Display German Level Display Degree Not Active* Not Active 1. extremely soft water 2. soft water 3. medium water 10-14 I I I 4. hard water 15-19 I I I I 5. very hard water 20-24 I I I I I 6. -
Page 23: Cappuccino Button
25.2 CAPPUCCINO BUTTON You can change the pre-set volumes for milk and coffee. This allows you to adjust the volume exactly to your cup size. Place a cup underneath the auto cappuccino system. COFFEE READY • Push and hold the Cappuccino Button until the display reads ENOUGH MILK PRESS BUTTON. -
Page 24: Maintenance Programs
Function Display Comment Maintenance MAINTENANCE Activate maintenance programs outside the automatic prompts Temperature TEMPERATURE Choose for each of the six coffee buttons from three temperature settings Coffee Strength AROMA Choose for each of the six coffee buttons from five different strength settings Cappuccino CAPPUCCINO Change the pre-set values... -
Page 25: Temperature
To activate one of the above programs, push the Rotary Dial and follow the instructions on the display. Please note: If you do not select any of the Maintenance Programs, the display will return to COFFEE 26.2 TEMPERATURE You can set the coffee temperature for the Cappuccino Button, the Special Coffee Button and the four coffee buttons on the right side to LOW, NORMAL or HIGH. -
Page 26: Milk Programming
COFFEE READY • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: a. Push the Rotary Dial. The display shows b. Turn the Rotary Dial until the desired duration is displayed, e.g. -
Page 27: Actual Time
• Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: a. Push the Rotary Dial. b. Turn the Rotary Dial until the desired setting shows up, e.g. SAVE LEVEL CONFIRMED c. -
Page 28: Information
Recommendations: If you use the machine only in the morning, leave the auto-off as is. If you use the machine all day long set the auto-off between 3 and 5 hours. This way the machine is always ready and you don’t have to turn it on and wait for it to warm up again. -
Page 29: Language Selection
and push the Rotary Dial. CONFIRMED e. The machine will display RENAME. Turn the dial until the display shows push the dial. COFFEE READY. The next time you make coffee and push the 1-cup Espresso Button, the display will show CUP OF Please note: the maximum length of message is 12 characters including spaces. -
Page 30: Beancover Missing
27.3 BEAN COVER MISSING When the display shows BEANCOVER MISSING brew coffee. For safety reasons the cover must be in place. Make sure the bean cover is in place correctly. Please note: If you lose or break the bean cover the Z5 cannot be used at all. -
Page 31: Decalcifying Process
MACHINE IS CLEANING. The cleaning program will dispense hot foamy water in intervals through the spouts. After a few minutes the machine beeps and the display shows GROUNDS EMPTY. f. Lift and remove the drawer. Empty the used coffee container and drawer and replace. -
Page 32: Emptying System Before Transport
approx. 35 minutes the Z5 will pump the decalcifying solution in intervals through the Milk Nozzle, then internally into the drawer, then through the Hot Water Spout and again into the drawer. When the water container is empty the display will show TRAY / GROUNDS EMPTY. -
Page 33: Troubleshooting
The closer the coffee spouts are to your cups, the less heat is lost in the air. The crema is more durable if the coffee flows down the inside of the cup, rather than hitting the bottom of the cup. Old beans Beans will lose aroma when sitting too long in the bean container. -
Page 34: Error Messages
• Remove any beans with a vacuum hose. • Attach the burr grinder release tool (Welcome Pack) to the upper burr (Fig. 15). • If you cannot find the tool, call customer service 1-800-220-5701 and we will send the tool free of charge. •... -
Page 35: Limited Warranty
35. LIMITED WARRANTY Please note: This warranty will be void if the Warranty / Product Registration has not been received two weeks after the purchase date (you can fax or mail the registration or you can register through our website www.capresso.com) This limited warranty covers your new IMPRESSA Z Series: For Household use only for one year or 6,000 coffee brewings, whichever comes first. - Page 36 Jura-Capresso, LLC 81 Ruckman Road, Closter, NJ 07624 201-767-3999 • Fax: 201-767-9684 Customer Service: 1-800-220-5701 Email: contact@capresso.com • Website: www.capresso.com...