Page 5
Instructions for use 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 large cups 5 Coffee key for 1 large cup 6 Coffee key for 2 small cups 7 Coffee key for 1 small cup 8 Key for special coffee 9 ON/OFF switch...
Important information for the user 2. Safety instructions Thank you for choosing this Jura product. 2.1 Warnings Please study these instructions carefully before using your new Children are unaware of the dangers that electrical machines re- present. Therefore children should never be left unsupervised machine and keep them in a safe place for easy reference in the around electrical machines.
If using acidic decalcifying agents be sure to immediately re- 3.4 Adjusting grinder move any splashes and drops from delicate surfaces, especially You can adjust the grinder to the roast of your coffee. We recom- natural stone and wooden surfaces, or take corresponding pre- mend the following: cautions.
Place a container under the coffee-spout (15) and press rinsing The machine has got 5 hardness settings to choose from. While adjusting, the chosen grade is shown on the display. UNIT RINSING The symbols on the display mean: COFFEE READY HARDNESS LEVEL—: water hardness function is switched off...
7. Use of Claris filter cartridges The water might be slightly discoloured (this is not damag- ing to the health). Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For 7.2 Replacing of filter further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“.
UNIT RINSING 9. Drawing off hot water COFFEE READY Put a cup under the height-adjustable coffee spout (22) and turn selector switch for hot water (19) to the symbol . The machine Put 1, respectively 2 cups under the coffee-spout and press the will now deliver hot water.
Place a cup under the steam/frothing nozzle (20) and immerse For cappuccino turn the selector switch (1) (Fig. 13) to area the frothing aid in the milk to be frothed or the liquid to be heated. For hot milk turn the selector switch (1) (Fig. 13) to area (3) Press steam portion draw-off key To increase the heat turn the selector switch (1) (Fig.
To store the new powder quantity in memory briefly press key 13. Programming POWDER QUANTITY / SELECT KEY. Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to By pressing the button, you can select the next phase, or adapt the result to your personal taste, various settings can be pro- press the...
By pressing the button, you can select the next phase, or 13.7 Programming water hardness press the button in order to leave the programming. (only with setting Filter no) HARDNESS LEVEL 3 13.4 Programming steam portion Press key STEAM PORTION By pressing key briefly you can programme the water Press key...
ECONOMY MODE OFF means that the stand-by-status for steam To switch off the automatic timer proceed as follows: is set to 20 minutes and the heating for the cup warming tray is on. Press key After 10 minutes the warning lamp goes out. By pressing the steam Press key key anew, the machine returns to stand-by-status for drawing off UNIT ON —:—...
14.3 Empty drip tray 13.14 Program key EMPTY TRAY By using key you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea If this message shows on the display no more coffee can be portion) to their original standard settings.
After warming milk, draw off some hot water to clean the 14.6 Clean machine pivoting nozzle inside. CLEAN UNIT You can take off the Profi Auto-Cappuccino/Caffè Latte for a After coffee, etc., has been drawn off 220 times or after 180 rinsing thorough cleaning.
In any case please wait until the filled decalcifying agent is Switch on your machine by pressing ON/OFF used up and the tank is empty. Never top up the decalcifying Press key until you can hear an acoustic signal. agent. EMPTY TRAY (FILL WATER might show as well) Remove and empty water tank.
FILL WATER 17. Disposal Place a container under the pivoting nozzle (20). For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG. OPEN TAP PRESS CALC 18. Tips for a perfect coffee UNIT DECALCIFIYING / PLEASE WAIT Height adjustable coffee-spout Place a container under the height-adjustable tea-spout (22).
19. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicator is stuck Remove tank, decalcify, rinse well, fill up with water and replace FILL BEANS Bean container is empty...
Cause Action CLEAN UNIT You have drawn off coffee 220 times or run Clean as described in chapter 14.6 the rinsing program 180 times Message still displayed, although machine Run cleaning program again; this time do not cleaned add cleaning tablet UNIT CALCED The espresso/coffee machine sector needs Run decalcifying program as described in...
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate 21. Legal information 22. Technical specifications These operating instructions contain all the information necessary Impressa X90/X95 for the correct use, operation and maintenance of your espresso/ Voltage: 230 V AC coffee machine.