Table of Contents
Advertisement
You can interrupt the draw-off prematurely at any time by
pressing the draw-off key again.
10 min. after the draw-off of milk, a rinsing is automatically
started. The rinsing is announced in advance by an acoustic
signal.
13. Switching the machine off
Switch the machine off with the ON/OFF
rinsing is automatically started when the machine is switched
off.
14. Programming
The following phases can be programmed:
Grinding amount
Temperature
Amount of water
Amount of milk
Portion of hot water
Water hardness
Clock
Machine on
Machine off
Draw-offs
Language
14.1 Programming grinding amount
Switch your machine on the with ON/OFF
Press the key PROG. until an acoustic signal is heard.
: ADJUST COFFEE QUANTITY /
SELECT PRODUCT
Press the required draw-off key.
: (selected product)
– .............. II .............. +
By pressing the key
+
or
be ground.
To store, press the key PROG.
: (selected product)
: 100%
: 0%
You can determine the allocation of the grinder "left" or "right".
By pressing the key
+
or
-
To store, press the key PROG.
: ADJUST COFFEE QUANTITY /
SELECT PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
14.2 Programming Temperature
: ADJUST TEMPERATURE / SELECT PRODUCT
Press the required draw-off key.
: (selected product)
STAND. TEMP.
Select the required temperature with the keys
standart)
To store, press the key PROG.
: ADJUST TEMPERATURE / SELECT PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
14.3 Programming amount of water
: ADJUST WATER QUANTITY /
SELECT PRODUCT
Press the required draw-off key.
operating switch. A
operating switch.
you can determine the amount to
-
you can change the values.
+
in order to reach the
+
or
(high or
-
+
in order to reach the
: (selected product)
WATER
90 ML
You can change the value by pressing the key
To store, press the key PROG.
: ADJUST WATER QUANTITY /
SELECT PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
14.4 Programming amount of milk
: ADJUST MILK QUANTITY / SELECT
PRODUCT
Press the key
or
: (selected product)
10 SEC.
You can alter the time by pressing the keys
time from 3 – 60 sec.)
To store, press the key PROG.
: ADJUST MILK QUANTITY / SELECT
PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.
14.5 Programming portion of hot water
Place a cup under the pivoting nozzle (18).
: HOT WATER PORTION / PRESS FOR HOT
WATER
: ENOUGH HOT WATER ? / PRESS FOR HOT
WATER
: HOT WATER PORTION / PRESS FOR HOT
WATER
+
Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
14.6 Programming water hardness
: WATER HARDNESS
LEVEL 3
Press the key PROG.
You can set the water hardness by pressing the keys
To store, press the key PROG.
+
Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
To determine the water hardness, please read Chapter 8
"Setting the water hardness"
14.7 Programming CLOCK
Programming the clock is necessary if the function "Machine on"
is used.
: TIME.
—:—
Press the key PROG.
By pressing the keys
+
or
To store, press the key PROG.
By pressing the keys
+
or
To store, press the key PROG.
Press the key
+
in order to reach the next phase or the key
EXIT to quit the programming.
+
or
.
-
+
in order to reach the
+
or
(draw-off
-
+
in order to reach the
+
or
you can set the hours.
-
you can set the minutes.
-
E
-
.
9
Advertisement
Table of Contents
