Jura capresso coffee grinder user manual (6 pages)
Summary of Contents for Jura Capresso IMPRESSA 68192
Page 1
CAPRESSO Impressa C9 One Touch Fully Automatic Coffee & Espresso Center with Clearyl Water Care System Operating Instructions and Warranty Customer Service 1-800-220-5701 Impressa C9 One Touch...
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids.
Page 3
Notice: This machine has a 3-prong grounded plug. To reduce the risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. DO NOT modify the plug in any way.
Fig. 1 Fig. 1a Main Power Switch located in back next to power cord Height-Adjustable Coffee Spout Left Button Cluster and Rotary Dial (See Fig. 3) Removable Water Tank Low Water Flotation Device (See Fig. 7.4) Clearyl Water Care Cartridge* Lid for Water Tank Ground Coffee Funnel Lid for Ground Coffee Funnel...
Page 6
Fig. 10 Fig. 11 Transparent fitting Stainless steel rod Fig. 14 venting tip chrome face plate Fig. 12 Black fitting coffee nozzle Milk hot water hose steam/milk nozzle Fig. 15 frothXpress System Frothing range Steam only DIAL no siphoning Steaming range Fig.
1. PRODUCT WARRANTY REGISTRATION Remove the Product Registration from the Welcome Pack, fill it out and mail or fax it to us within two weeks or register your product online through our website: www.capresso.com. Important: This registration is part of your warranty (chapter 21). If your retailer sent the product registration to Jura-Capresso when you purchased the machine, it is not necessary to register again.
prevent the extraction of bitter oils and release less caffeine than any other brewing method. You will always make the absolute freshest and most aromatic cup of coffee. This is the reason why many European restaurants and hotels serve only fresh pressure brewed coffee.
• Never fill anything but fresh, cold clean water into the water container, except when decalcifying (chapter 17.1). • Never use mineral or carbonated water. You can use tap water, bottled water, spring water, distilled water and reverse osmosis water. •...
6a. FILLING THE WATER TANK Please note: Only use fresh, cold water. Never fill water tank with carbonated water, milk or any other liquid. • Remove the water tank, rinse and fill with fresh, cold water. • Replace water tank and make sure that it engages securely. 6b.
• Light roast: use a finer adjustment (smaller dots). • Dark roast: use a coarser adjustment (larger dots). • Open the cover of the bean container (Fig. 1.9). • To adjust fineness, turn the grinding wheel during grinding to the desired position (Fig. 6). ATTENTION: Oily beans tend to stick together.
9b. BREWING COFFEE AND ESPRESSO The machine has two pre-set coffee buttons, (Fig. 3.6) and COFFEE (Fig. 3.5). Both buttons are pre-set for coffee strength, coffee volume and temperature (chapter 5). Brewing one cup: • Place one cup underneath the Dual Coffee Spouts and push the desired button.
• Push the Ground Coffee button (Fig. 3.3) READY. • Fill 1 or 2 level measuring scoops of ground coffee into the opening for ground coffee (Fig. 1.7) and close the lid (Fig. 1.8). • Now push one of the coffee buttons to brew your coffee, e.g. COFFEE, then briefly PRE-GROUND.
Frothing Position: The dial points to the upper part of the face (12 to 2 o’clock), which is used for Cappuccino. In the 12 o’clock position the frothXpress creates the most milk froth. Turning the dial towards the 2 o’clock position increases the milk temperature (Fig.
10e. PREPARING HOT MILK / HOT CHOCOLATE The Cappuccino System can produce hot milk or hot chocolate without brewing coffee. READY. • Connect the milk container to the frothXpress system or use the long flexible hose inserted into any milk container (Fig. 19). •...
• Push the Hot Water button again to stop. READY. During the hot water release you can override the programmed setting by turning the Rotary Dial to the desired volume. 11. VISUAL PROGRAMMING OF BEVERAGE PORTIONS Chapter 14.1 explains how to re-program all parameters (volume, strength, temperature) for all beverage buttons.
Display German Level Degree INACTIVE* — 1. extremely soft water 2. soft water 3. medium water 10-14 4. hard water 15-19 5. very hard water 20-24 6. extremely hard water 25-30 *INACTIVE: You can only use this setting for distilled water. Level 5 and Level 6: If the tap water falls into these two cate- gories, decalcifying will be frequent.
with its tapered end down into the water container (Fig. 10). Make sure it fits inside the fins and push down gently. • Close the cartridge holder making sure it snaps into place (Fig. 11). Fill the water tank with fresh cold water and replace. Activating: You must activate the cartridge for the machine to monitor it properly.
• If the machine will not be used for a longer period of time, empty the water container and remove the CLEARYL filter. Fill a glass with at least 2 inches of water and immerse the filter. Place the glass in the refrigerator. •...
If you do not want to change another button, turn the dial until the display shows EXIT and push the Rotary Dial: READY. Example 2: Re-program the Cappuccino button to: 3.5 oz. of coffee, strong, milk for 20 seconds, temperature stays at HIGH. READY.
Please note: For Daylight Saving you have to re-set the time. Please note: When the main power switch in the back of the machine is turned off or if your home has a power outage, the time setting is lost and has to be re-set as explained above. 14.5 AUTO-ON You can set a time at which the machine automatically turns on and is ready to make coffee.
cases no further coffee brewing is possible before the task has been completed. PRESS RINSE Push the Rinse button (Fig. 3.2). The machine pumps hot water through the coffee spouts or fills the system initially (chapter 6c) or continues a cleaning program. FILL WATER TANK The water tank is almost empty.
CLEAN (chapter 16.1); manual tablet cleaning C-RINSE (chapter 10g); manual cappuccino rinsing. RINSE (see example below in chapter 15.1). DE-SCALE MACHINE (chapter 17.1). If you push the Rotary Dial to enter one of the above programs, the display guides you through the necessary steps. Please note: If the display shows RINSE one of the above programs within five seconds, the C9 OT will...
15.4 EMPTYING THE SYSTEM BEFORE TRANSPORT This procedure is necessary to prevent water and frost damage in case you intend to transport the machine. READY. • Remove the frothXpress system and place a container under the steam nozzle (Fig. 18). •...
17. DECALCIFYING The machine has an integrated decalcifying program. This program takes 45 minutes. When the display shows DE-SCALE it is time to decalcify the machine. The Rinse button is illuminated. You can still make coffee. It is recommended to decalcify the machine within the next 3 to 4 days.
The machine will automatically remind you when it’s time to decalcify again. 17.2 MANUAL DECALCIFYING If you use very hard water it is possible that calcium builds up prematurely. If your coffee does not come out as hot as before it is a sign for calcium build-up.
necting valve is free of any particles (like a coffee bean etc). Problem The ground coffee funnel is clogged; the internal brew- ing chamber is clogged. Solution: Place a large cup underneath the coffee spout. Run one or more manual hot water rinse cycles as explained in chapter 15.1.
every 3 weeks. Always keep extra tablets available. • Auto-Cappuccino Cleaner ( sample included). Model #63801 Tip: If you use the auto cappuccino cleaner every other day you need a new bottle every 5 weeks. • Decalcifying tablets (large square tablets) - Model #66281. Please note: You must use decalcifying tablets if you do not use the Clearyl cartridge.