The water circulation nozzle
• Clean the water circulation nozzle, if clogged.
Cleaning your washer
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with warm water and a neutral, non-
Immediately wipe off any spills. Wipe with a damp cloth.
Try not to damage the surface with sharp objects.
IMPORTANT: Do not use methylated spirit, solvents or similar products.
Dry around the washer door opening, flexible gasket and door glass. These areas
should always be clean to ensure a water-tight seal.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE: Remove hard water deposits using only cleaners labeled as safe for washing
If the washer is stored in an area where freezing can occur or moved in freezing
temperatures, follow these winterizing instructions to prevent damage to the washer:
1. Turn off water supply tap.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1 gallon (3.8 ) nontoxic recreational vehicle (RV) antifreeze to empty wash
drum. Close door.
5. Set spin cycle and let washer spin for 1 minute to drain out all the water.
Not all of the RV antifreeze will be expelled.
6. Unplug electrical power cord, dry drum interior, and close door.
7. Remove the two-compartment container from the Dispenser. Drain any water in
compartments and dry the compartments.
8. Store washer in an upright position.
9. To remove antifreeze from washer after storage, run empty washer through a
complete cycle using detergent. Do not add laundry.