Auto-Off; Rinse Settings; Unit On/Off; Off After 5 - Jura Capresso Impressa 68193 Operating Instructions And Warranty

Example:
Set the On-time to 6:15 AM
on automatically on Sundays.
COFFEE READY
• Push the Rotary Dial until the display shows MAINTENANCE.
• Turn the Dial until the display shows
• Push the Dial UNIT ON --.--, push again
• Turn the dial to set the hours
Dial to confirm. UNIT ON 6:00
• Turn the Dial to set the minutes
to confirm. CONFIRMED
• Turn the Rotary Dial until
and push ON/OFF / MON
• Turn the dial until ON/OFF / SUN YES
ON/OFF / SUN YES.
• Turn the dial until display shows
to confirm CONFIRMED
• Turn the dial to EXIT and push. The display shows
ON/OFF / MON YES.
• Turn the dial to EXIT and push.

14.6 AUTO-OFF

The S9 OT is pre-set to turn itself off 5 hours after last use.
You can change the auto-off interval between 0.5 and 15 hours
or you can set the machine not to turn itself off.
Recommendations: If you only use the machine in the morning,
change the auto-off to 2 hours. If you use the machine all day
long, leave the auto/off as is. This way the machine is always
ready, and it is not necessary to turn it on and to warm up.
and program the S9OT not to turn
UNIT ON/OFF.
UNIT ON --.--.
UNIT ON 6:00 AM and push the
AM.
UNIT ON 6:15 AM and push

, then UNIT ON 6:15 AM.
ON/OFF / MON YES is displayed
YES.
is displayed and push
ON/OFF / SUN NO

and then ON/OFF / SUN
COFFEE READY.
Example:
Change the auto-off from 5 hours to 2 hours after last use.
COFFEE READY.
• Push the Rotary Dial until the display shows MAINTENANCE.
• Turn the Dial until the display shows
• Push the Dial
• Turn the dial until display show
confirm. CONFIRMED
• Turn the dial to

14.7 RINSE SETTINGS

This program allows you to change both the Rinse cycle and the
Cappuccino Rinse cycle.
Rinse cycle (INIT
After turning the machine on with the On/Off button, the S9 OT
and push heats up and then prompts you to run a short rinse cycle
(chapter 8). You can re-program this function so that this rinse
NO.
cycle is done automatically.
Example:
Change the initial rinse cycle from manual to automatic:
COFFEE READY.
• Push the Rotary Dial until the display shows MAINTENANCE.
• Turn the Dial until the display shows
dial. INIT RINSE
• Push the dial again,
INIT RINSE AUTO
then INIT RINSE
• Turn the dial to
• Turn the dial to
28.

OFF AFTER 5

OFF AFTER 5 H.
OFF AFTER 2 H

, OFF AFTER 2
EXIT and push. COFFEE
RINSE)

RINSES

MANUAL.
INIT RINSE MANUAL
and push to confirm.
AUTO.
EXIT and push the dial RINSES.
EXIT and push COFFEE
H.
and push to
H.
READY.
and push the
and turn to

CONFIRMED
READY.