Setting The Time; Setting The Auto-On Time; Changing The Auto-Off Setting; Unit On (Auto-On) - Jura Capresso Impressa J5 Operating Instructions And Warranty

READY,
• Push and hold the Rotary Dial until the display shows RINSE.
• Turn the dial clockwise until the display shows
• Push the rotary dial. The display shows
• Turn the dial until the display shows
• Push the rotary dial. For two seconds the display shows

and then ENERGY .
• Turn the rotary until the display shows EXIT.
• Push the rotary dial. READY.

17.4 SETTING THE TIME

Setting the time lets you set an auto-on time (chapter 17.5).
READY,
• Push and hold the rotary dial until the display shows RINSE.
• Turn the dial clockwise until the display shows
• Push the rotary dial. The display shows
the hour and push the dial to confirm the hour setting.
• Turn the dial to set the minutes and push to confirm For two
seconds the display shows
• Turn the rotary until the display shows EXIT.
• Push the rotary dial. READY.
Please note: If you turn the machine off with the main power
switch (Fig. 1a) or if you unplug the machine or experience a
power outage, the actual time will not be retained. The next time
you turn the machine on, the display will first show
Turn the Rotary dial to set the hours, then push the Rotary dial.
Turn the Rotary dial again to set the minutes and push to
confirm. Now the AUTO-ON
(see next chapter).
ENERGY
SAVE –

SAVE .
TIME
–:– Turn the dial to set
OK and then TIME.
TIME –:–
time will be automatically restored

17.5 SETTING THE AUTO-ON TIME /

–. You can set a time at which the machine turns itself on. This way
you don't have to wait for the machine to warm up. At the pro-
grammed time the J5 turns itself on, it will start heating and the
display will then show RINSE. Just push the Rinse button and
OK
within seconds you can brew your first cup of coffee.
Please note: Auto-on will only work if you set the actual time
and the main power switch is turned on (when the small red light
in the On/Off switch is illuminated, you know that the main
power is on).
Setting the time allows you to program an auto-on time.
READY,
• Push and hold the rotary dial until the display shows RINSE.
• Turn the dial clockwise until the display shows
• Push the rotary dial. The display shows
• Turn the dial to set the hour and push the dial to confirm the
hour setting.
• Turn the dial to set the minutes and push to confirm For two
seconds the display shows
• Turn the rotary until the display shows EXIT.
• Push the rotary dial. READY.

17.6 CHANGING THE AUTO-OFF SETTING /

Your machine is pre-set to turn itself off 2 hours after last use.
You can set the Auto-Off from .5 hour to 15 hours or you can set
.
it to INACTIVE. In this case the machine will not turn itself off
automatically.
Recommendations:
• If you use the machine only in the morning, leave the auto-off
at 2 hours.
26.
UNIT ON
UNIT ON.
–:–
OK and then UNIT ON.
OFF AFTER