10F. Overriding The Cappuccino Settings; 10G. Cappuccino Rinsing; 10H. Using Hot Water - Jura Capresso Impressa 68193 Operating Instructions And Warranty

"MILK PORTION" siphons milk for a programmed time and
stops automatically).
• Push the button inside the Selector Dial. The display shows
MILK or MILK PORTION. During this time hot steamed /
frothed milk is created and delivered into your cup.
COFFEE READY.

10f. OVERRIDING THE CAPPUCCINO SETTINGS

As with the coffee buttons you can override the pre-programmed
volumes of the milk beverage buttons.
Example: The factory setting for the Cappuccino button is normal
strength (3 beans graphic), 14 seconds of milk frothing and 2 oz.
of coffee. Prepare a one-time special cappuccino, extra strong
(5 beans graphic), more milk froth (20 seconds) and 3 oz. of coffee.
COFFEE READY
• Place your cappuccino cup under the Cappuccino system
and open the cover for the Rotary Dial (Fig. 1.19).
• Push the Cappuccino Button (Fig. 3.6). During grinding turn
the Rotary Dial to change the strength until the display shows
the 5 bean-graphic.
• When the frothing starts turn the rotary dial until the display
shows 20 SEC.
• When the coffee brewing starts turn the Rotary Dial until the
display shows 3.0 OZ.

10g. CAPPUCCINO RINSING

In only a few seconds this rinsing program removes milk droplets
inside the frothXpress.
After preparing a beverage with milk (Cappuccino Button, Latte
Macchiato Button, Milk, Milk Portion) the S9 OT display shows
COFFEE READY / RINSE CAPPUCCINO
illuminates. You can still continue making any beverages. We
recommend to perform the cappuccino rinsing since it takes
only a few seconds and makes sure that your frothXpress is free
of any milk.
• Turn the frothXpress dial to the 3 o'clock position (Fig. 16) and
place a cup underneath the cappuccino system.
• Push the Rinse button. The display shows
Hot water is pushed through the frothXpress for a few seconds.
COFFEE READY.
• Turn the frothXpress dial back to your preferred position.
IMPORTANT: If you do not use the Cappuccino Rinsing cycle,
milk droplets might harden inside the frothXpress, resulting in
insufficient frothing performance.

10h. USING HOT WATER

The hot water function lets you pre-warm cups, brew tea, make
a quick cup of soup, or add hot water to your coffee or espresso
to create a milder flavor.
• Place a cup under the hot water spout (Fig. 4).
• Turn the Selector Dial (Fig. 3.3) until the display shows
WATER or HOT WATER PORTION
delivers a pre-programmed amount of hot water and then
stops automatically. HOT WATER delivers hot water until you
stop the action by pushing the Selector Dial button again).
• Push the button inside the Selector Dial. The display shows
the pre-set temperature e.g.
HOT WATER or HOT WATER
COFFEE READY.
20.
and the Rinse button
CAPPU. RINSING.
HOT
(HOT WATER PORTION
TEMPERAT. X HIGH and then
PORTION.