Table of Contents
Advertisement
4 – Playback operations—Repeat playback
•
(random track order). In this mode, each
SHUFFLE
track is played once before the disc repeats. Using
the track skip functions will move backwards or
forwards through the random order, e.g. if track 7 is
followed by track 10, it is possible to use the track
skip keys to go back to track 7, which is remem-
bered as being before immediately before track 10.
The red
display indicator lights in this
SHUFFLE
mode.
•
(see "Programmed order playback" on
PROGRAM
page 24 below). The red
tor lights in this mode.
•
Normal playback mode. Programming is
CONTINUE
cancelled, and playback continues in the normal
order.
The selected mode is shown in large characters on
the display. It disappears from the display a few sec-
Programmed order playback
The steps to set up to 99 program steps (tracks) to be
played back in a specified order are as follows:
1
Set the play mode to
above.
2
The display changes to show
,
0
00:00 00
Tr
meaning that no program steps have yet had
tracks assigned to them.
3
Set the switch on the remote control to let the
number keys control either drive 1 or drive 2.
4
Use the number keys on the remote control to
enter a track number (including the
to enter values greater than 9, as described
above).
The track entered is assigned to the program
step, and the display changes, showing the
track number, the total time of the program
so far, and the step number, e.g.
.
2
14:56 03
Tr
5
The next program step can then be entered.
NOTE
Steps 4 and 5 above can also be carried out from the
main unit by turning and pushing the MULTI DIAL.
Repeat playback
The repeat playback function allows repeated play-
back of the whole disc (
ALL
repeat off (
).
OFF
24
TASCAM CD-RW402 Owner's Manual
display indica-
PROGRAM
as described
Program
key
+10
), a single track (
) or
1
onds after selecting the mode, and the display returns
to its previous mode.
Using the main unit menu system
1
Press the appropriate
2
Turn the
MULTI DIAL
appears in the display. Push the
3
Turn the
MULTI DIAL
appears in the display. Push the
4
Turn the
MULTI DIAL
detailed above are shown as
(shuffle),
PMODE>PGM ?
back) and
PMODE>CONTI?
5
Push the
MULTI DIAL
option is displayed.
6
Repeat steps 4 and 5 above until the program
is complete.
7
Press the
key to start playback at the
PLAY
first program step.
The display shows the track, the current time
display, and the program step number.
While in programmed playback mode, using
the skip keys or the
wards and forwards in the order set in the
program.
Use the
READY key
to halt playback temporarily or
the
key to stop playback of the program.
STOP
If the
key is used, when playback is restarted,
STOP
it starts from the first program step.
Clear the program by setting the
The program is also cleared when the disc tray is
opened, and if the
key is pressed when play-
STOP
back is stopped in programmed order mode.
The programmed play order is not memorized when
power is turned off.
If an attempt is made to enter more than 99 program
steps, the message
PGM Full !
Using the remote control
1
Press the appropriate
edly on the remote control unit to cycle
key.
MENU
until
PLAY MENU ?
MULTI DIAL
until
PLAY MODE?
MULTI DIAL
. The three options
PMODE>SHUF ?
(programmed play-
(continue playback).
when the appropriate
moves back-
MULTI DIAL
play mode.
Continue
appears on the display.
key repeat-
REPEAT
.
.
Advertisement
Table of Contents
