Table of Contents
Advertisement
5 – Recording—Copy-protection
To perform a fade-in:
1
With a recordable disc loaded, press the
key so that the unit enters record
RECORD
ready mode.
2
Start the source material, and press the
key.
FADER
To perform a fade-out:
1
While recording, press the
As the fade progresses, the monitored signal
gradually becomes quieter, reflecting the
level recorded on disc.
Copy-protection
The CD-RW402 allows copy-protection to be applied
to the discs produced. Naturally, the copy-protection
applies only to digital-to-digital copies made from
the discs produced on the CD-RW402.
There are three settings:
•
(may be freely copied), where no copy-protec-
FREE
tion is applied to the recorded disc.
•
(single-generation copying), where one digital
1GEN
copy ("child") can be made from the recorded disc,
but no digital copies ("grandchildren") can be
made from the child.
•
(copy prohibited) which prevents any digital
PROH
copies being made from the recorded disc
1
Press the
MENU
key (2) and turn the
to display
DIAL
REC MENU 1 ?
2
Press the
MULTI DIAL
38
TASCAM CD-RW402 Owner's Manual
key.
FADER
MULTI
.
.
As the fade progresses, the monitored signal
gradually becomes louder, reflecting the level
recorded on disc.
2
When the end of the fade-out time is reached,
the unit goes into record ready mode.
Recording can be restarted with the
key or the
or
PLAY
It is not possible to change the fade-in and fade-out
times to new values while recording is in progress.
3
Turn the
MULTI DIAL
.
COPY ID ?
4
Press the
MULTI DIAL
5
Turn the
MULTI DIAL
setting between
COPY ID>
6
Press the
MULTI DIAL
leave the menu.
NOTE
Copy-protection applies on a ""per-track", not a per-disc
basis. This means that you can apply different copy-protec-
tion levels to different tracks (but you can't apply different
copy-protection levels to different parts of the same track).
If copy-protection is important to your work, you may want
to check this setting every time you make a recording, to
ensure that you have the protection level that you want.
FADER
s.
READY key
until the display shows
.
to change the fade time
,
and
.
FREE
PROH
1GEN
to make the setting and
Advertisement
Table of Contents
