Table of Contents
Advertisement
4 – Playback operations—TOC Editing (drive 1 only)
Combining tracks
This allows the combination of a track with the track
immediately before it. It cannot therefore be used
when the playback position is anywhere in the first
track, as there is no previous track (the display shows
if you attempt this).
POINT ERROR!
1
Press the
MENU
key and turn the
until the display shows
.
MULTI DIAL
2
Turn the
MULTI DIAL
. Push the
COMBINE ?
Erasing tracks
This erases the track from the TOC (of course, the
data is not erased, but the track no longer exists in the
table of contents).
1
Press the
key and turn the
MENU
until the display shows
MULTI DIAL
.
Dividing tracks
This splits the current track into two at the current
playback position (remember that a track cannot be
less than four seconds in length and there cannot be
more than 99 tracks per disc).
1
Set the point at which the split is to occur.
You may find that the jog function is useful
here ("Using the jog function" on page 23).
2
Press the
key and turn the
MENU
until the display shows
.
MULTI DIAL
Redefining the start point
It may be useful to start the playback at a different
point from the one marked by the track boundary
(avoiding a false start, etc.).
1
Set the point at which the new start point is
to occur. You may find that the jog function is
useful here ("Using the jog function" on
page 23).
28
TASCAM CD-RW402 Owner's Manual
MULTI DIAL
. Push the
TOC EDIT ?
until the display shows
.
MULTI DIAL
MULTI DIAL
. Push the
TOC EDIT ?
MULTI DIAL
. Push the
TOC EDIT ?
The display now shows
3
Push the
MULTI DIAL
track with the previous track.
The playback position is moved to the start of the
newly-created combined track.
If the first track of the pair contains CD TEXT, this is
the text used for the new track.
2
Turn the
MULTI DIAL
. Push the
ERASE TRACK?
The display now shows
3
Push the
MULTI DIAL
track.
3
Turn the
MULTI DIAL
. Push the
MULTI DIAL
DIVIDE ?
The display now shows
4
Push the
MULTI DIAL
track at the playback position point.
NOTE
If the track contains CD TEXT, this will be used for the
first track of the pair of tracks created in this way.
2
Press the
key and turn the
MENU
until the display shows
MULTI DIAL
.
3
Turn the
MULTI DIAL
. Push the
StartPt SET?
The display now shows
4
Push the
MULTI DIAL
the current track at the playback position
point.
.
COMBINE OK ?
to combine the current
until the display shows
.
MULTI DIAL
.
ERASE OK ?
to erase the current
until the display shows
.
.
DIVIDE OK ?
to divide the current
MULTI DIAL
. Push the
TOC EDIT ?
until the display shows
.
MULTI DIAL
.
Pt SET OK ?
to set the start point of
Advertisement
Table of Contents
