Table of Contents
Advertisement
Disc compare
As well as the automatic compare operation follow-
ing a copy as explained above, it is also possible to
compare two finalized CD-ROMs at any time.
1
With the finalized disc in drive 2 and the
original in drive 1, press
Display 1 shows
DISC COMPARE
shows
COPY> COMPARE
A-B copying
This allows the copying of material from an audio
disc between the A and B points ("A and B points
(drive 1 only)" on page 22).
1
The source disc should be in drive 1 and the
destination disc in 2.
2
Set the A and/or the B points on the source
disc ("A and B points (drive 1 only)" on
page 22).
If only the A point is set, the copy will be
from the A point to the end of the track. If
only the B point is set, the copy will be from
the start of the track to the B point.
If both points are set, in order that the final
disc corresponds to the Red Book standard,
these points must be at leas 4 seconds apart.
Point A must be before point B.
3
With both drives stopped, press the
key. The displays show
COPY
.
COPY> A-B
A-B Excluded copy
This allows the copying of a track (audio) except the
portion delimited by the A and B location points. The
A and B location points must be in the same track for
this function to be enabled.
1
The source disc should be in drive 1 and the
destination disc in 2.
2
Set the A and/or the B points on the source
disc ("A and B points (drive 1 only)" on
page 22).
If only the A point is set, the copy will be
from the A point to the end of the track. If
only the B point is set, the copy will be from
the start of the track to the B point.
.
DISC COPY
and display 2
.
A-B
and
A-B COPY
8 – Copying discs—A-B copying
2
Press
MULTI DIAL
.
COMPARE GO?
3
Press
MULTI DIAL
operation.
4
Press the
MULTI DIAL
5
Select the copy speed (x4, x2 or x1), and press
the
(2).
MULTI DIAL
Drive 2 display shows
6
Press the
MULTI DIAL
place (standby and copy) as for other copy
operations.
The displays return to normal when the copy
operation is complete.
NOTE
The error messages mentioned above appear if the
wrong type of disc has been loaded as source or desti-
nation.
If the A and B points are too close together the display
shows
.
Not enough
If the B point is set before the A point, the display
shows
.
A-B ERROR
It is not possible to copy more than one track if the
tracks have different emphasis status.
If both points are set, in order that the final
disc corresponds to the Red Book standard,
these points must be at leas 4 seconds apart.
Point A must be before point B.
3
With both drives stopped, press the
key. The displays show
COPY
.
COPY> A-B
4
Turn the
MULTI DIAL
excluded copy mode. Drive 1 display now
shows
A-B ExclCOPY
.
COPY>AB EXCL
5
Press the
MULTI DIAL
TASCAM CD-RW402 Owner's Manual
(2). The display shows
(2) to start the compare
(2).
.
COPY START ?
(2). Copying takes
A-B
and
A-B COPY
(2) to select the A-B
and drive 2 display shows
(2).
47
Advertisement
Table of Contents
