Start Guide - Nibe F1245 Installer Manual

XL 1 Connection, heating medium flow
XL 2 Connection, heating medium return
XL 3 Connection, cold water
XL 4 Connection, hot water
XL 6 Connection, brine in
XL 7 Connection, brine out
Symbol key
Symbol Meaning
Shut-off valve
Safety valve
Level vessel
Expansion vessel
Pressure gauge
P
Particle filter

Start guide

NOTE
There must be water in the climate system
before the switch is set to " ".
1. Turn the heat pump's switch (SF1) to " ".
2. Follow the instructions in the start guide in the
heat pump display. If the start guide does not start
when you start the heat pump, start it manually in
menu 5.7.
TIP
See page 34 for a more in-depth introduction
to the heat pump's control system (operation,
menus etc.).
Commissioning
The first time the heat pump is started a start guide is
started. The start guide instructions state what needs
to carried out at the first start together with a run
through of the heat pump's basic settings.
The start guide ensures that the start-up is carried out
correctly and cannot be bypassed. The start guide can
be started later in menu 5.7.
30 Chapter 6 | Commissioning and adjusting
Caution
As long as the start guide is active, no function
in the installation will start automatically.
The guide will appear at each installation re-
start until it is deselected on the last page.
Operation in the start guide
A. B.
C.
A.
Page
Here you can see how far you have come in the start
guide.
Scroll between the pages of the start guide as follows:
1. Turn the control knob until one of the arrows in
the top left corner (at the page number) has been
marked.
2. Press the OK button to skip between the pages in
the start guide.
B.
Name and menu number
Read what menu in the control system this page of the
start guide is based on. The digits in brackets refer to
the menu number in the control system.
If you want to read more about affected menus either
read off in the sub-menu or in the installation manual
from page 38.
C.
Option / setting
Make settings for the system here.
D.
Help menu
In many menus there is a symbol that indicates
that extra help is available.
To access the help text:
1. Use the control knob to select the help symbol.
2. Press the OK button.
The help text often consists of several windows that
you can scroll between using the control knob.
D.
NIBE™ F1245