Jeep Wrangler 2014 Operating Information Manual page 133

Saying a number, or sequence of numbers, followed by
"Send," is also to be used for navigating through an
automated customer service center menu structure, and
to leave a number on a pager.
You can also send stored Uconnect® Phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the
system will prompt you to enter the name or number and
say the name of the phonebook entry you wish to send.
The Uconnect® Phone will then send the corresponding
phone number associated with the phonebook entry, as
tones over the phone.
button and say, "Send." The
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
NOTE:
• You may not hear all of the tones due to mobile phone
network configurations. This is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In – Overriding Prompts
The "Voice Command" button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking "Would you like to pair a phone, clear a...," you
could press the button and say, "Pair a Phone" to
select that option without having to listen to the rest of
the voice prompt.
3