Jeep Wrangler 2014 Operating Information Manual page 128

126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: The Uconnect® Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
Making a Second Call While Current Call is in
Progress
To make a second call while you are currently on a call,
press the button and say "Dial" or "Call" followed
by the phone number or phonebook entry you wish to
call. The first call will be on hold while the second call is
in progress. To go back to the first call, refer to "Toggling
Between Calls" in this section. To combine two calls, refer
to "Conference Call" in this section.
Place/Retrieve A Call From Hold
To put a call on hold, press the
a single beep. This indicates that the call is on hold. To
bring the call back from hold, press and hold the
ton until you hear a single beep.
button until you hear
but-
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the button until you hear a single beep, indicat-
ing that the active and hold status of the two calls have
switched. Only one call can be placed on hold at a time.
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the
double beep indicating that the two calls have been
joined into one conference call.
Three-Way Calling
To initiate three-way calling, press the
a call is in progress, and make a second phone call, as
described under "Making a Second Call While Current
Call is in Progress." After the second call has established,
press and hold the
beep, indicating that the two calls have been joined into
one conference call.
button until you hear a
button while
button until you hear a double