Electronic Sway Bar Disconnect - If Equipped - Jeep Wrangler 2014 Operating Information Manual

Axle lock will disengage if the vehicle is taken out of 4L
(Low) range, or the ignition switch is turned to the OFF
position.
ELECTRONIC SWAY BAR DISCONNECT — IF
EQUIPPED
Your vehicle may be equipped with an electronic discon-
necting stabilizer/sway bar. This system allows greater
front suspension travel in off-road situations.
This system is controlled by the SWAY BAR switch
located on the instrument panel (to the left of the steering
column).
Sway Bar Switch
Press the SWAY BAR switch to activate the system. Press
the switch again to deactivate the system. The "Sway Bar
Indicator Light" (located in the instrument cluster) will
illuminate when the bar is disconnected. The "Sway Bar
Indicator Light" will flash during activation transition, or
when activation conditions are not met.
STARTING AND OPERATING 441
5