Removing The Rear Seat - Two-Door Models - Jeep Wrangler 2014 Operating Information Manual

Removing The Rear Seat — Two-Door Models
WARNING!
• It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seriously
injured or killed.
• Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.
• Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
• In a collision, you or others in your vehicle could
be injured if seats are not properly latched to their
floor attachments. Always be sure that the seats are
fully latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163
1. Fold the rear seat forward following steps 1 and 2
under "Fold And Tumble Rear Seat" in this section.
2. Press down on the release bar on each side, and pull
the seat out and away from the lower bracket.
3. Remove the seat from the vehicle.
Release Bar Location
3