Removing The Soft Top - Two-Door Models - Jeep Wrangler 2014 Operating Information Manual

192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Removing The Soft Top — Two-Door Models
1. Locate and remove the two boxes that contain the
following items:
• Right and left door frames
• Four door frame attachment knobs
• Right and left quarter windows
• Rear window
• Two rear window roll up straps
• Two Sunrider® secure straps (if equipped)
• Two rear swing gate brackets
2. Remove the hard top. Refer to "Freedom Top™ Three-
Piece Modular Hard Top — Front/Rear Panel Re-
moval" in this section.
3. Remove the soft top bow assembly pivot bracket
screws (two per side) using a #T30 Torx® head driver.
4. Disconnect the knuckles from the left and right metal
pivot brackets. Remove the soft top from the vehicle
and store in a clean, dry location.
NOTE: To aid in disconnecting the knuckles, you may
carefully tap on the knuckles using a rubber mallet.