On Mode - WARRIOR BOATS Boats User Manual

ON MODE

In the "on mode", the engine is steered hydraulically and
controlled with the steering switch on the Feather Trim grip. The
steering torque in the "on mode" is eliminated giving the driver
push button steering control.
To operate the "on mode", turn the on/off switch to the "on"
position. Then press steering switch right or left to steer the
engine. It is highly recommended that your first time driving the
boat with the Pro Tiller Steering System, that you spend some
time driving the boat in both modes at different speeds to get the
feel of how the Pro Tiller operates. Start slowly, drive around
and turn the engine several times to get the feel of the system.
WARNING!
Never operate the Pro Tiller Steering System in the off position
above 1500 RPM. Over powering steering torque may occur. To
avoid personal injury, always maintain a firm grip on the tiller
handle, and wear an approved life jacked (PFD) and lanyard
cord. Never operate your boat under the influence of drugs or
alcohol.
Steering Controls for Pro Tiller 3-Switch Feather Trim Grip
Front Switch – On/Off, Top Switch – Steering control left/right
turn, Bottom Switch – Trim control for engine
IMPORTANT
Right Turn – tiller handle will move away from the driver.
Left Turn – tiller handle will move toward the driver.
6-15