Drain Plugs; Hull Drain Plug; Bilge Blowers - WARRIOR BOATS Boats User Manual

Drain Plugs

SINKING HAZARD – Install drain plugs before launching.

One plug is located in the transom to allow water to
drain before trailering or storing.

Hull Drain Plug

The screw-type drain plug is constructed of black nylon and
features an "O" ring for positive sealing. Fine threads maintain
sealing under high vibration conditions. The plug is retained in
drain plughole with a retaining strap.
Ventilation

Ventilation system on stern drive boats removes gasoline
fumes from the bilge and engine compartment.

Keep vents free from obstruction.

Bilge Blowers

Explosion/Fire Hazard – Run blower at least 4 minutes before
starting engine. Check engine compartments for fumes.
WARNING
WARNING
5-8