Power Charge Panel; 24 Volt Trolling Motor; 12/24 Volt Troll Plug (Black); 12/24 Volt Trolling Motor Plug In/12 Volt Accessory Plug In - WARRIOR BOATS Boats User Manual

24 Volt Trolling Motor

On the 12/24V trolling motor plug, connect the positive 24V
wire to the terminal marked "24", and the negative wire to the
terminal marked "-".
Tighten all terminal screws to 14-20 in.-lb torque. Attach the
body of the plug to the housing by the two assembly screws.
Tighten the two strain relief screws at the rear of the housing.

12/24 Volt Troll Plug (Black)

Use this plug for 24 volt trolling
motors. Attach red wire to port
marked "24". Attach black wire
to port marked "-".Make sure all
fasteners are tight.

Power Charge Panel

The Warrior Power Charge Panel is a multi functional electrical
system. It can perform 5 different functions that include:
a. 12/24-Volt-trolling motor plug in.
b. 12-Volt accessory plug in.
c. "On Board" battery maintainer.
d. Emergency Power Supply
e. Battery charger plug in
12/24 Volt trolling motor plug in
Attach the proper plug to your trolling motor:
Black plug – 24 Volt
Red plug – 12 Volt
Plug trolling motor into "Troll" port.
12 Volt accessory plug in
Attach a red plug – 12 Volt to an accessory, i.e. spotlight, and
plug into either the "start" port of "Troll" port.
5-3