Seat Pedestals - WARRIOR BOATS Boats User Manual

Seat Pedestals

The ABYC (American Boat and Yacht Council) has
recommended seating standards for the marine industry.
Warrior boats use two types of Class A Pedestals. They are:
AD Driver Pedestal – Seat mount must incorporate a
"mechanical interference lock" and resist 150 foot pounds of
torque. The AD Pedestals are marked with a green decal that
says "AD" in the center. These pedestals are to be used for the
driver only.
AP Passenger Pedestal – Seat mount must resist 30 foot pounds
of torque. The AP Pedestals are marked with a blue decal that
says "AP" in the center. These pedestals are to be used for
passengers only.
To raise the seat, simply lift your weight slightly off of the seat
and move the lever up. To lower the seat, keep your weight in
the seat and lift lever up. The power unit is equipped with a
shock-absorbing cylinder for boating comfort. DO NOT abuse
the pedestal by putting excessive strain on the seat and power
unit when it is in the full up position. Always lower the seat to its
full down position when the boat is underway and during
storage.
*****************WARNING****************
When boat is in motion, all passengers must be seated with seat
locked in the forward position. Do not swivel seat to stern when
boat is in motion as it may cause passenger to be ejected from
seat. To avoid obstruction of driver's view, no one should be
seated in bow area when boat is in motion. Seat back rest should
be folded down and snapped in place. All seat pedestals should
be lowered to full down position when boat is underway.
Do not allow passengers to sit on gunnels when boat is in motion
as they may be ejected from boat. To avoid personal injury, do
not sit on seat back rests.
5-9