Table of Contents
Advertisement
CAUTION
• Do not remove or insert an SD card when the power is ON.
Always turn the power OFF (standby) before removing or
inserting a card.
• If you remove or insert an SD card when the power is ON, all
recorded data and settings made since the last time the unit
was shut down or a song was saved will be lost. These lost
data and settings cannot be recovered.
• When the power is ON, do not cut the power to the unit by
disconnecting the power cord, for example.
• Before turning the power ON, minimize the headphones
volume and the volume on any monitoring system connected
to this unit.
TIP
If an amplifier or powered speakers are connected to the
LINE OUT jacks, you can monitor using speakers.
Listening to the demo song
The included SD card in the unit contains a demo song. We
will use this demo song to practice listening to and mixing a
recording.
Press the HOME button to open the Home Screen.
1
2
When the Home Screen is open, press the MENU button to
open the MENU screen.
Use the DATA wheel to select the SONG menu item and
3
¥
press the F4 (
) button to open the SONG screen.
2 – Quick Start Guides
NOTE
When an item is selected, it appears as light characters on a
dark background.
Use the DATA wheel to select the LOAD item and press the
4
¥
F4 (
) button to open the SONG LOAD screen, which
shows a list of the songs on the card.
Use the DATA wheel to select DEMO_03 and press the F2
5
(EXEC) button to load the demo song and return to the
SONG screen.
6
Press the HOME button to return to the Home Screen.
Á
7
Press the PLAY (
) button, and raise the TRACK 1–8 faders,
MASTER fader and PHONES LEVEL knob to listen to the
demo song.
9
TASCAM DP-03SD
Advertisement
Table of Contents
