Table of Contents
Advertisement
12 – Exchanging Data with a Computer
Exporting tracks
You can export tracks as 16-bit, 44.1-kHz mono WAV files.
When the recorder is stopped, press the MENU button to
1
open the MENU screen.
2
Turn the DATA wheel to select IMPORT/EXPORT, and
¥
press the F4 (
) button to open the IMPORT/EXPORT
menu.
3
Turn the DATA wheel to select the EXPORT TRACK
¥
item, and press the F4 (
) button.
Song tracks that have audio recordings are displayed in a list.
The file name makes the source track number clear.
TIP
Press F3 (NAME) to change the file name.
NOTE
Song tracks that do not have audio recordings are not
displayed in the file list.
Turn the DATA wheel, to select a track for export, and press
4
the F4 (
) button to put a check in the checkbox.
✔
By checking multiple checkboxes, you can export more than
one track at once. Select a track and press the F4 (
again to remove the check from its checkbox.
64
TASCAM DP-03SD
5
When you finish putting checks next to the tracks that you
want to export, press the F2 (NEXT) button.
The amount or open space on the FAT partition (which is the
destination for the exported tracks) and the total number of
tracks to be exported is shown.
Press the F4 (EXEC) button. The selected track is exported
6
to the FAT partition with the edited file name with the
".WAV" extension added as the track file name. If you have
previously exported a track file with the same name, a
confirmation message (Duplicate name – Are
you sure?) appears. Press the F3 (YES) button to
overwrite the older track.
Press the HOME button to return to the Home Screen.
7
8
Connect this unit to a computer (see "Connecting with a
computer" on page 60).
9
Use the computer to copy track files from the
directory on the FAT partition to the computer.
10 After exporting track files to the computer, disconnect the
unit from the computer using the proper procedures and
then remove the USB cable (see "Disconnecting" on page
60).
) button
✔
WAVE
Advertisement
Table of Contents
