Handlebar Position - KTM 690 SMC USA 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Handlebar position

9.22
A 0 0 A
B 0 0 B
Guideline
Screw, top triple clamp
–
Mount and tighten screw
Guideline
Screw, steering stem
–
Check the steering head bearing play. (
–
Remove the motorcycle from the work stand.
On the upper triple clamp, there are 2 holes at a distance
Distance between holes

The holes on the handlebar support are placed at a distance
Distance between holes

The handlebar can be mounted in 4 different positions. In this way, the handlebar can be
installed in the position most comfortable for the rider.
400271-11
M8
.

M8 20 Nm
(14.8 lbf ft)
p. 75)
15 mm (0.59 in)
3.5 mm (0.138 in)
17 Nm
(12.5 lbf ft)
Loctite ® 243™
to each other.

from the center.

77