Installing The Oil Filter; Cleaning The Oil Screens - KTM 690 SMC USA 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the oil filter

x
9.84

Cleaning the oil screens

9.85
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Insert oil filters
–
Oil the O-rings of the oil filter cover. Mount oil filter covers
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
100204-10
x
–
Place a suitable container under the engine.
and .
 
and .
 
M5 6 Nm (4.4 lbf ft)
149