Service Points; Armature Inspection - Yamaha WaveRunner XL1200Ltd Service Manual

– +
ELEC
STARTER MOTOR

SERVICE POINTS

Armature inspection

1. Inspect:
Armature shaft 1
Damage/wear → Replace.
2. Inspect:
Commutator
Dirt → Clean with 600 grit sandpaper.
3. Measure:
Commutator diameter
Out of specification → Replace.
Min. commutator diameter:
27.0 mm (1.06 in)
4. Check:
Commutator undercut
Contaminants → Clean.
NOTE:
Remove all mica and metal particles with
compressed air.
5. Measure:
Commutator undercut
Out of specification → Replace.
Min. commutator undercut:
0.2 mm (0.01 in)
7-24
E